China Zoomlion Rough Terrain Crane Rt100

High quality 100T Rough Terrain Crane RT100 CE and Ghost Certificate

Main Features:
1.Fullwheel drive, large ground clearance and strong offroad performance. It is suitable for off-road travel
2.Complete-extension, half-extension and complete-retraction outrigger operation, no-outrigger operation and driving with load
3.Fullwheel steering, short wheel base, small turning radius, strong maneuverability; it is applicable to driving and operation in a narrow field
4.The cab and operating room are integrated into one. Comprehensive lifting operation increases lifting capacity of the front.
5The utilization of network node control technique can realize intelligent fault diagnosis, facilitate the troubleshooting for the electrical system of the complete vehicle and improve the maintainability of the electrical system.
Technical Paramters
TypeItemUnitValueWorking performanceMax. rated lifting weight x working radiuskg.m100000x3.0Max. lifting moment of basic boomkN.m3319Max.lifting moment of longest boomkN.m1388Max. lifting height of longest boomm45.6(to the center of head pulley )Max. lifting height of jibm63DimensionsOutline dimensions (LxWxH)mm14247x3620x3960Distance between outriggers (longitudinal x transversal)mm8000x7900Main boom length (completely retracted - completely extended)mm11500~43000Jib length (completely retracted - completely extended)mm10800~18500Main boom angle of elevation°-3~78Swing range 360°unlimited swing (Full range)Working speedMax.speed of single rope on the drum of main winchm/min126Boom extension times170Boom retraction times158Boom derricking up times82Boom derricking down times69Swing speedr/min0~1.5Hydraulic systemRated working pressureMPa30Rated working flowL/min500Hydraulic oil tank capacityL1200MassComplete vehicle kerb masskg65000Front axle loadkg33200Rear axle loadkg31800TravelingMax. traveling speed (forwards / backwards)km/h24/15Wheelbasemm4600Treads (front / rear)mm2860
Notes: Explanations to Lifting Load
1) The rated lifting load value given in the table is the maximum lifting capacity when the crane is set on solid and level ground. The load should not exceed 75 % of the tip-over load;
2) The total rated lifting load given in the table includes the weight of hook and slings;
3) The working radius given in the table is the actual value including the deformation amount of the boom, so lifting operation should be carried out as per working radius.
4) 75 % of the tip-over load takes into account wind force 6, i.e. lifting operation still can be carried out with fully-extended outriggers when the wind pressure reaches 125N/m2, but lifting operation with tyres or traveling with load are prohibited.