China Zyj-400 130 Drilling Rig for Water Seam Infusion in The Underground Laneway

ZYJ-270/170 drilling rig for water seam infusion to reduce the gas and dust in the underground laneway

Infusing water into the coal bed to push out the gas, the dust amount in the coal-mining face can be reduced, the poor environmental condition in the working face and in the laneway can be improved, the gas flux can be decreased, and thus the gas density in the wind flow will become lower than the critical level, and finally the productivity in the working face will be boosted.

The post can be tightly fixed in the roadway through the lifting oil cylinder of the post, and
the stability of the drilling rig in the drilling process is enhanced by the bracket. and the
safety performance is improved. The track of the propeller makes a structure with the post
and the propeller makes a reciprocating actions along the slide rail by multi-stage cylinder.
cycloid hydraulic motor under the action of the high pressure oil drives the drilling rod and
drilling bit to make the drilling through the rotating device of the output shaft.
The double gear pump is used to control the normal operation of the components for the
power pack. In order to ensure the cleanness of the oil, air filter is used for adding the
hydraulic oil and the oil filter to suck out the hydraulic oil.
The operating panel is composed of a three valve, and the oil from the power pack is
conveyed to the control valve through a rubber hose and then is distributed to the
hydraulic system of the drilling rig.
The operating panel is provided with a speed regulating valve, an overflow valve, a
hydraulic control one-way valve, a hydraulic lock, etc., so as to ensure the safe operation
of the whole system. The drilling rig can connected with the air or water to cool the system
or discharge the slag.

Main specification of drilling rigDescriptionUnitParameterRated pressureMPa12Rated torqueN.m270Rated rotation speedr/min170Propelling forcekN15/20Drilling angle°±90°Drilling depthm150Drilling speedmm/min>150Propelling strokemm1100Applicable hardness f ≤10Drilling rodmmφ 42Drilling dia.mmφ 55-φ 94Weight of the rigkg100Max. drilling heightmm3800Min. drilling heightmm1800Main specification of power packMotor model YBK2-160M-4Motor powerkW11VoltageV380/660, 660/1140CurrentA 26.6/13.126.6/13.1Double section gear pumpMl/r 40/1040/10Rated pressureMPa14Rated flow rateL/min 4242Rated rotation speedr/min 14601460Oil tank capacityL 120120Power pack dimensionsmm 1450x460x7001450x460x700Weight of the power packkg 260260