China die steel flat bar alloy steel

3Cr2Mo 1.2311 P20 Hot Rolled Forged Plastic Mould Steel
1: 3Cr2Mo 1.2311 P20 steel introduction
AISIP20 Steel PlateMaterial is a versatile, low-alloytool steelthat is characterized by good toughness at moderate strength levels. The special purpose mold steel P20 steel plate is commonly used for plastic injection mold cavities and tooling and for die casting dies for zinc. P20 mold steel plate material is typically sold in the pre-hardened condition at a hardness of approximately 300 HBW.
2: P3Cr2Mo 1.2311 P20 Steel equivalentCountryUSAGermanGB/TStandardASTM A681DIN EN ISO 4957GB/T 1299GradeP201.23113Cr2Mo
3: P3Cr2Mo 1.2311 P20 steel chemical compositionGradeCSiMnPSCrMoP200.28-0.40.2-0.80.6-10.030.031.4-20.3-0.551.23110.35-0.450.2-0.41.3-1.60.030.031.8-2.10.15-0.253Cr2Mo0.28-0.40.2-0.80.6-10.030.031.4-20.3-0.55
4: P3Cr2Mo 1.2311 P20 steel mechanical properties
The mechanical properties mainly include tensile strength, yield strength, elongation, area or reduction, hardness, impact value, non-metalic inclusion etc. Different heat treatment, the mechanical properties will be different, such as normPneumatic Component alized, tempered, QT. If you want to know thTag Gun e properties, kindly contact the salesman.
5: P3Cr2Mo 1.2311 P20 steel overviews
Available Size (mm)Thickness/DiameterWidthPackage & Printing Service LengthPlate8-4601600-22004000-10000Round12-120/4000-6000Block250-800800-16002000-6000Heat treatmentNormalized ;Annealed ;Quenched ;TemperedTestTensile strength, Yield strength, elongation, area of reduction, impact value, hardness, grain size,ultrasonic test, US inspection, magnetic particle testing, etc.Payment termsT/T;L/CTrade termsFOB; CIF; C&F; etc..Delivery time1) For abundant stock, 7-15 days.
2) For customized products, 15-30 days.6: P3Cr2Mo 1.2311 P20 Delivery condition
For hot forged bar, usually the delivery condition is hot forged, annealed/QT rough turned/Black surface.
For hot rolled bar, usually the delivery condition is hot rolled, annealed/QT, Black surface.
For hot forged plate, usually the delivery condition is hot forged, annealed/QT, milled surface
For hot rolled plate, usually the delivery condition is hot rolled, annealed/QT, black surface.3Cr2Mo 1.2311 P20 Hot Rolled Forged Plastic Mould Steel
3Cr2Mo 1.2311 P20 Hot Rolled Forged Plastic Mould Steel
3Cr2Mo 1.2311 P20 Hot Rolled Forged Plastic Mould Steel