China in Europe Copper Cable Shredder Machine for Sale

TF-400-1 waste copper wires and cables recycling machine


TF series cable shredder is used for recycling waste household communication cables, car cables,motor cables and other industrial cables. The machine mainly includes crushing and separating,and it also has high efficiency dust collecting system to get clearly copper pellet and plastic pellet.
TF-400-1(capacity:80-100kg/h) is suitable for small size factory or customers who newly start wire recycling. It has compact structure and takes small space, easy to move and operate. only ONE operator is required to start and handle the whole system.

Applicable wiresWaste communication copper cables, motor cable, car cable, industrial cable,household cable, enamelled cable.Applicable wires diameter0.3-20mmIf you are not sure whether your cables are applicable for our equipment, you could send some cables to us for testing.
TESTING IS FOR FREE!


1.Put wires and cables into the crusher, in which they are crushed and plastic sheath and copper separated completely. The length of the crushed material is based on the mesh of the riddle: the bigger the mesh is the longer the crushed material will be and the larger the output will be. The mesh should be chosen in production according to the type of the material.

2.The crushed material (mixture of copper granules and plastic pieces) is conveyed to the separator by the conveyor, during which procedure dust and part of plastic pieces of light weight(including fiber, rope, or tapes, etc. mixed in the wires) are collected by the pressure-reducing blower. The above opening of the pressure reducing blower is connected with the dust collector opening in which a dust collecting bag is used to prevent discharge of dust for the purpose of environmental protection. Dust and part of plastic pieces of light weight are collected in this bag and will be discharged when the bag is full.

3.The separator is used for separating plastic pieces and copper granules. According to the differences of the physical properties and specific gravity between different materials, there is specific gravity deviation under the forces of Aerodynamic and Vibration friction. By adjusting the speed of material conveying and amplitude parameters, copper granules (of larger specific gravity) will move to the riddle bottom and move from down to up, and plastic pieces (of smaller specific gravity) will move to the above of copper granules and move from up to down, and in the end they will both be discharged through different openings.

4.All the units are installed on the underbed to form a whole structure. The machine is adjusted ready for production before shipping, and the customer only need to connect it to the power supply.


Main spare parts of copper recycling machine is screen and moving blades.Normally we supply extra one set sapre parts includes 1 piece of screen and 12 pieces of blades for JLF-400-1 cable shredder.
We also recommend proper related machines to customer according to the raw material to get best recycling effect.
Please contact with us freely to get best solution!

1. Cable stripper: if customer deal with large size copper wires with multi-strand,it is better to separate its cores and then put them into granulator machine.
2. Double shaft crusher: If the raw material is with large lenth, it will be helpful to cut them to smaller pieces before granulating.
3.Single shaft crusher: It is also pre-treat machine for cutting cables to small pieces.
4. Blade sharping machine: After long time operating, blades on the granulator machine need maintiance to get good sharpness.
5. Megnatic conveyor: If there is a small part iron mixing inside the copper wire, we can add a magnatic conveyors to take out of the iron mixing of the copper pellet to get high purity.
6. Belt conveyor: It is supplied to customer who required totally automatic copper wire feeding.


Liyang Tongfu Machinery Co.,Ltd is professional manufacturer who specialized on recycling and new energy(environmental filed).
We proposes that"remarkable quality practical innovation" Welcome customers contact us for ture business relationships and achieving mutual success also establishes the long-term friendly cooperation.

1.Is there quick-wear part on the machine?
The spare part of the machine is blades and screen, their use life is more than 2 years, and we could also supply blade sharping machine to you for maintenance.
2.What's the longest continuous working time for the recycling machine?
Normally 10 hours per day.
3.Is the machine easy to operate? How many workers required to operate it?
We design precise but simple control system for the machine.
For single recycling machine, only one worker is required.
For complete recycling line, two workers are required.

Attn: Tina
Mobile:+8615981925357