China in Vitro Diagnostic Rapid Test for Fsh

Introduction
The FSH rapid test dipstick is a rapid test that qualitatively detects the FSH level in unrine specimen at the sensitivity of 25mIU/ml. The test utilizes a combination of antibodies including a monoclonal anti-FSH antibody to selectively detect elevated levels of FSH

1, FSH tests are available in strip,cassette and midstream format.

2,This convenient test has a sensitivity of 10-25mIU/mL,making it an effective aid in early detection of Menopause.

3,The One-Step FSH Menopause Test is suitable for both professional and home use.

4,Packing:

Application
The FSH Rapid Test ( Urine) is a rapid chromatographic immunoassay for the qualitative detection of follicle stimulating hormone(FSH) in urine to aid in the detection of menopause.
Direction of Use
Allow the test, urine specimen and /or control to reach room temperature(15-30ºC) prior to testin.

Determine the day to begin test. Bring the pouch or canister to room temperature before opening it. Remove the test Dipstick from the sealed pouch or closed canister and use it as soon as possible.With arrows pointing toward the urine specimen for at least 15 seconds. Do not pass the maximum line (MAX) on the test when immersing the test. See illustration below. Place the test Dipstick on a non-absorbent flat surface, start the timer and wait for the colored line(s) to appear. The result should be read at 3 minutesINTERPRETATION RESULT (Please refer to the illustration)
Positive: Two lines are visible and the line in test line region(T) is the same as or darker than the line in the control line region(C). A positive result means that the FSH level is higher than normal. Record the results and see the chart below to interpret result.
Negative: Two lines are visible, but the line in the test line region(T) is lighter than the line in the control line region ©, or there is no line in the test line region (T). A negative result means that the FSH level is not elevates at this time. Record the results and see the chart below to interpret result.
Invalid: Control line fails to appear. Insufficient specimen volume or incorrect procedural techniques are the most likely reasons for control the failure. Review the procedure and repeat the test with a new test. If the problem persists, discontinue using the test kit immediately and contact your local distributor.

Test Interpretation
Review the result of both tests ( if applicable) and interpret according to the chart below.
For patients experiencing premenopausal symptoms plus irregular menstrual cycles:

1st test 2nd test Interpretation
Positive
PositiveMost likely in perimenopause. Discuss with patient methods and therapies to promote good health after menopause. Patient should NOT immediately discontinue contraception. PositiveNegativeMay be in early stages of perimenopause. Patient should NOT immediately discontinue contraception.ORNegativePositive
Negative
NegativeMost likely not experiencing perimenopause this cycle. If symptoms persist, repeat patient testing in the following month or review other possible causes for symptoms.

For the patients experiencing menopausal symptoms who have had NO menstrual cycle for the past 12months:

1st TestInterpretationPositive Menopause has most likely occurred. Test may be repeated. Discuss with patient methods and therapies to promote good health after menopause.

Features

1. Qualitative result in 3 -5 minutes

2. 25mIU/ml sensitivity or required sensitivity

3. 99% accuracy

4. Take sample any time of day

5. Supply OEM & ODM service

6. Approved CE 0123 & iSO 13485 Certificates
FAQ
1. Q: What is the shelf life of the FSH Urine Test kit? How should they be stored?
A: From date of manufacture: 24 months, room temperature

2. Q: Can I read the results after the read time has passed?
A: Results are to be read at the 3 minute result read time. Results obtained when there are variations from the procedure cannot be guaranteed.

3. Q: How sensitive is the test?
A: As we all know the W.H.O International Standard is 25 mIU/ml, we can do10 MIU/ML as your demand.

4. Q: How can you ensure the quality of your products?
A: Samples will be prepared anytime, and we can send you our quality report before delivery.

5. Q: Does your factory do OEM/ODM?
A: Yes, we can produce the product according to our customers' required.

6. Q: Can I get a sample before bulk order? How can I get it?
A: Sample is free, but freight collect. Please provide your DHL/TNT/FedEx account to pick up samples or you can prepay the freight cost by PayPal or Western union, we will send out sample ASAP once getting your payment.

7. Q: Do you have minimum order requirements?
A: No, according to client's need.

8. Q: How to ensure the cargo quality?
A: We will supply bulk sample before shipping. They can represent the cargo quality.

9. Q: Why choose Singclean?
A: We are the professional China hCG pregnancy test manufacturer/supplier/factory not trading company, so the price is quite competitive in the market.

10. Q: What's the payment method?
A: T/T is highly appreciated . USD & Euro are accepted.
Western Union/PayPal: Quickly to the account, Priority in delivery
Behalf Paying: Your Chinese friends or your Chinese agent can pay for in RMB

Our Service
1:Factory direct price, price is competitive with high quality.
2: Original manufacturer provide OEM & ODM service for you.
3: Smooth delivery near Shanghai and Ningbo Port.
4: Free samples available sent for your evaluation.
Payment & Package& Delivery
* Payment:West Union, PayPal, T/T, L/C
* Package: Individual foil pouch, 1T, 25T, 50T, 100T; OEM package is accepted
* Delivery method: By Air or By Sea, samples via UPS, TNT, FedEx, DHL, EMS and etc.

about Singclean