Cn-C03 Micro Slide-Resistant Monocomponent Polyurea Flooring

Monocomponent Polyurea flooringabout polyurea coating
Spray Polyurea Elastomer (SPUA) technology is anew solvent-free and pollution-free green construction technique to meet the needs of environmental protection over the past decade on abroad. Because of its excellent comprehensive performance, such as strength, anti-abrasion, anti-corrosion, it's known as 'Universal coatings'. Thus, SPUA gains highly recognition and wide application in various constructions over the past decade.The excellent performance
Monocomponent polyurea flooring
Its functions are much more than just dustproof and covering as normal flooring coating. And it upgrades security level thoroughly.
Effective silencing function
Without paving expensive and short-life sheet, it keeps the office environment quiet.
It is Integral formed and seamless. It is abrasion-resistant, scratch- resistant, non-slip and easy to clean.
Simple construction
Convenient renovation.It is multifunctional flooring with low cost.
Performance advantages
Abrasion-resistant; impact-resistant; non-slip; silencing; good weatherability; color-lasting; simple constructionmain advantagesImpact-resistant
Abrasion-resistant
Scratch- resistant
non-slipGood weatherability
Rolling-resistant
Color-lasting
Fast-curingLow-cost
Simple construction
No special equipment
Non-toxic.
Why should we choose Monocomponent polyurea flooring?High abrasion-resistant; it has longer service life than epoxy flooring and traditional polyurethane flooring.It has excellent impact-resistance. It is adaptable to various conditions.Its resilient surface can be made to nonslip texture. It is better in nonslip than epoxy flooring and traditional polyurethane flooring.Curing fast; it can be put into use on the day after construction day. Exempt from the impact of stop production for along time by the cons truction.Overcome the epoxy flooring's shortcoming- big noise caused by vehicle running and braking. Its erasure effect is much better.It is better water-resistant, weather-resistant and never powdering, cracking or falling off comparing to the epoxy flooringSimple construction can be made with roller or trowel scratch. No need to use special and expensive spraying equipment.Comparison beteween Epoxy Flooring and Polyurea flooringPerformanceEpoxy FlooringMonocomponent Polyurea FlooringFlexibilityWeak flexiblity, Easily Scratch, cracking or delaminating under external impact or temperture change; the lower the temperature, the poor the Flexibility of epoxy flooringGood impact resistance and flexibility, effective crack resistance of concrete; good scratch resistcance and wear resisitance; keep good flexibility and not delaminate under high hardness.WeatherabilityPoor weatherability, easily decomposing and powdering under UV radiation; poor water resistance, not suitable for outdoor and wet environment; poor performance in high temperature, scratch or color fading under high pressure.Good weatherability, waterproof, anti-UV, little influence by sunshine (slight discoloration),never powdering, cracking or falling off; can be used in wet environment; good performance under high temperature, effectively resist damages fromtire caused by sudden braking.Skid ResistancePoor skid resistance since the surface of epoxy flooring is hard and glossy, thus it is easy to slip or fall on it; appear slippage when braking or turning the corner, tire friction noise is frequently occured.Polyurea coating has agood performance of skid resistance, can form micro ball non-skid surface through simple roller construction, this surface has afounction of skid resistance and weaken the brightness.Overall StrengthAdd alot of filling powder in self leveling layer to lower cost which can hardly keep quality; performance weaker after resin molded, strength of self leveling layer is weak, easily corrosion and falling off.MMA self leveling resin has ahigh strength that far exceed flooring requirement; it also has acharacteristic of high adhesion and fast curing, and can adjust the speed of curing.ConstructionCuring slow, construction period is long and limited to temperature, the minimum construction temperature need to above 10 centigrade degree.Good adhesion, curing fast, does not sagging, little influence by temperature or humidity for construction, can curing in 3hours which can shorten the construction period.
The Product Structure
Project Case
Application:
Monocomponent polyurea flooring suits these following places:OfficesPassagewayMeeting roomsLecture hallsClassroomsInstrument baseExhibition hallCompany profile and Certificate
FAQ
1.Are you manufacturer or trader?
We have two major production bases,one in Nanjing and the other in JiangMen,and the laying area of our materials is more than ten million square meters per year.
For all the products we produce by ourselves and with our own logo. Welcome to visit our factories if interested.
2.What is the advantage of your factory? Why should Ichoose you?
Our products are odorless and non-toxic
We have two main production bases and can make every kinds of SPU venues, running track,artificial grass,sports flooring construction and colloidal particles.
We have more than 20 years' development and production history
Exceed ten million squre meters every year in the world
3.What kind of certificate you have?
We have certificate of RoHS,ISSS,CE,ITF2,ITF5,IFFF, ISO9001 and ISO14001,SGS, ASG,etc and can export our products all over the world.
4.What is guarantee time of your products?
5 yearsContact informationJiangsu Changnuo New Materials Co.,LtdTel86-25-8695890Mobile86-15952035275Websitewww.changnuosports.comEmailQQ351753165jupiter0821lukeqi1984