Cnm-Yjm Series Prestressed Concrete Monostrand Anchor System

Henan Prestressing Equipment Co., Limited is aprofessional manufacturer which design, manufacturer and provide OEM production of bonded and unbonded monostrand and anchor system for many years, our monostrand anchor system have been exported more than 35 countries. Contact with us by ,Mobile Phone:+86 1367371 3569.
Adaptable to avariety of structures, unbonded monostrand can be easily, rapidly, and economically installed. Applications for monostrand systems include elevated slabs, slab-on-grade, beams and transfer girders, joists, shear walls and mat foundations.Our unbonded systems feature 0.5" and 0.6" diameter strands coated with alayer of specially formulated grease. The outer layer is seamless plastic extruded in one continuous operation to provide protection against corrosion. Each tendon is precisely coiled, cut, labeled, color-coded and delivered to the construction site. Awide variety of anchorage systems (see Product Information tab below) are available to meet design specifications.
Encapsulated unbonded monostrand systems are used in areas that are subject to corrosive conditions. Strands are protected at the anchorages using greased plastic sleeves and grease-filled end caps. Additionally, anchorage components are fully encapsulated in ahigh density polyethylene plastic covering and an optional encapsulated intermediate coupler anchorage system can be used to protect the strand at construction joints.
The material for this anchorage isspheroidal graphite cast iron, which puts tranditional anchor ring and plate into one integration anchor. It simplifies the complicated the manufacturing procedure and structure, which has the advantage of convenient construction, perfect sealability and easy to guarantee the perpendicularity between the anchorage and steel strands. And the cost will be lessenedmore than 20%Product Name: CNM Post Tensioning Mono Anchor for PC StrandModel: ZTM13(0.5"), and ZTM15(0.6").Color: Normal Steel Color( Chemical Dioxide Surface Treatment) or Galvanized Golden Color.Anchor Shape: Rectangle ShapeMaterial for Anchor Plate: Spheroidal Graphite Cast IronMaterial for Wedges: 20CrMnTi High Glass Carbon SteelFeatures: Good Deburring and ChamferingAssembly Accessories: Flat Anchorage Plate, Wedges, Pocket FormerStandard: ASTMA416, BS5896, GB/T 14370-2007Strand Tensile Strength: 1860Mpa to 2000Mpa
1). YJM15 applies to 15.2/15.24mm, 15.7mm pc strand.2). YJM13 applies to 12.7mm, 12.5mm &12.9mm pc strand.3). YJM10 applies to 9.3mm, 9.53mm pc strand.4). YJM11 applies to 10.8mm pc strand.5). YJM18 applies to 17.8mm pc strand.6).YJM22 applies to 21.6/21.8mm pc strand.

Henan Prestressing Equipment Co.,Limited manufacture full complete post tension components, materials and post tension equipment for buildings and bridge construction. Kindly please call us: Mobile Num.+8613673713569.Our Product Ranges:1. Anchor System: unbonded monostrand anchor system, multistrands anchor system, flat anchor system, arch type flat anchor, anchor barrel and wedges, ground anchor, rock and soil anchor, anchor wedges, anchor bearing plate, spiral reinforcing rings.2. PC Strand System: unbonded pc strand, bonded pc strand, 12.7mm prestressed cable, 15.24mm prestressed strand, epoxy coated pc strand,galvanized pc strand, 6mm, 7mm, 9mm pc steel wire.3. Duct System: galvanized metal duct, HDPE plastic duct, curved type galvanized metal duct, flat duct, corrugated pipe.4. Heavy equipment: bridge girder launching machine, drilling rig, bridge girder transporter