Colorful Epoxy Tile Grout Gap Filling Silione Sealant Cement

Its feature smooth in the face, easy to clean, waterproof and moisture-proof which can prevent crevices from harminghuman health. At the same time, it possesses 95% of the hardness and 5% of the high flexibility so that after the construction of the tile gap is more smooth and full at the same time, which has a higher flexibility and better fit the edge of the tile, can protect the edge effectively, and avoid the tile damage due to the product colloid too hard and so on. Hongjia Silicone waterproof epoxy grout completely replaces the original caulking agent or white cement.Advantage1.Smooth.After solidification,our product is smooth as ceramic,and also easy to clean.
2.Dirt-resistance.Never goes mold and black.
3.Colorful.After using it,you may find the color of our product is natural delicate and burnish.
4.Environmental.Non-toxic,inodorous.In accordance with the harmful material set limitation in
5.Convience.Easy to use and clean.
Scope of applicationIt is suitable for the fill of all kinds of seam,such as,ceramic,mosaic,stone and wood.It also applies to seal of toilet,sanitary ware,or something else.Whatsmore,it also can decorate the seam,for example,to beautifying the edge of wallpaper.Also,it can be applied to the cambered surgace of artificial stone,and stainless steel.Our product are widely used in shopping malls,star hotel,high-grade resistance,halls,doors,windows,floors,and walls of the washroom and kitchen.
Instructions1. For 3 to 7 days after you complete the work on ceramic,than you can use our product.The deepth of the seam need to be clean about two third of the ceramic.Also pls keep the seam clean and dry.
2. Before operation,taking about 40cm material out,in order to avoid the front section material is not mixed uniformly.
3. In the process of operation,if you don't use it more than 15 minutes,the material in glue gun is goingt to become solid,so you need to take a little strength to push out the material.If more than 20 minutes,the material in glue gun become solid,it's hard to push out,you need to change another glue gun,and then continue your work.Anyway,if you need't use it,just keep.When you need again,you just need to change the glue gun and use.
4. If work in low temperature,the glue can not take out easily,pls put our product in 40ºC to 60ºC water for 15 minutes,and then use it.
After operation for 24 hours,our product cannot contact water or other liquid.Also it can not be
pollted be chemical substances and other pollutant.
FAQ
Sure,we are looking for agent all over the world.
YES.
Sure,FREE SAMPLE WILL BE SAND YOU SOON.
Normally 20-35days after receiving your payment,but it can be negotiated based on order qty production schedule.