Compound Interior Wall Putty Paste

GLORYSTAR F1 Compound Interior Wall Putty PasteProduct advantages:Fine and smooth Strong bond Environmental protection No glue is needed Open bucket can be usedProduct use:Wall leveling Wall repair Wall crack resistanceHow to use
1)This product is suitable for all the coats for hand and machine application. Slightly stir Before use and directly apply to plasterboards or interior wall.
2)the interior wall or plasterboard surface must be clean, smooth and firm, dry and without dust or oil.
3)After it dry fully, then it can be painted.
4)Cover tight the lid of barrel or close the bags after use.
5)Tools: Interior wall putty is applied using a trowel, and daub the putty to the interior wall in average state.Specifications:
1. The packing: 18kg/barrel.
2. Life time: 9 months.
3.The whiteness degree:90% .
4.dry time :3 hours.
5.Use quantity:1 m2 drywall or ceiling area for 1 kg putty paste.Matters needing attention:The Interior Wall Putty can be used directly as it is in the bucket.It should not be mixed with other materials. It should not be applied in temperatures under +5°C.Consumption is approximately 0.8-1.1kg for one square meters of wall. To obtain better results, apply two or three putty layer over the surface of wall.Avoid the putty being stiff. Before long periods of not being in use,the edges of the bucket should be cleaned and safely capped.After the end of the work, all tools and buckets should be cleaned with water.A larger amount of Interior Wall Putty could be needed in concrete surfaces.
Main components:
Acrylate copolymer, mineral filler, additive, water