Concrete Pavement Finishing Ride Type Road Trowel Machine

1.Main View Product Description:
1 for the concrete floor of the pulp, compaction, smoothing, wiping
2 gearbox large modulus design, aluminum box, maintenance-free, long service life;3 low center of gravity design, the machine running smoothly and flexible;
4 pursuit of perfection, the pursuit of excellence, the implementation of lean production.
A product description:
Riding Trowel Machineis equipped with two walking wheels to facilitate you to move in the short distance, the machine net weight 330Kg, so heavy machine we can not help a person moving the case of moving the machine, just push the trolley can move The effort. The machine has a double disc, two blades, the construction is significantly higher than otherpower trowel machine. Can be installed two discs for pulp, stable operation.
2. products use:
whiteman power trowel for the size of the construction site, widely used in cement pavement pulp, smooth, trowel. Can also be used for plant, warehouse, square road maintenance, concrete surface construction.
3.product parameters:ModelFMZ-S36Working power24hp/3600rpmMode of operationdrivingfuel tank capacity20LWorking width75in.Lubricant capacity1.8LWorking speed0-135rpmFuel consumption313g/kWhspatulaSizeNumber of spatula8total length1940mmSpatula size350x150mmtotal width990mmFixed pitch4.75 inin total height1050mmModel HONDAWeight1950x1010x1070mmModelHONDA,GX630WeightTypegasoline engine, air-cooled 4-strokeworking weight300kgMaximum working weight380kg4. operating methods
1. If the user is not going to stop the car, please need to be too small - when the engine is running, the short stop should be separated from the clutch.
2. When the slope is parked: the wiping machine is placed on the slope and the wedge should be inserted under the front and rear wheels.
3. Should ensure that the location of the wiping machine does not cause traffic accidents
4. Trowning machine drag and drop is generally not more than 200m
5. The whiteman power trowel should be carried out when the static hydraulic device is located in the disengaged state, grinding machine, that is, in the static pressure device below the small button into the pump body, gasoline carRiding Trowel Machine, and drag the speed should not Higher than 3km / h.
Second appropriate manipulation
Whether it is uphill or downhill rolling construction fence production, trowel drive wheel should be in the back. This has the following benefits: Uphill, the airport cement road grinder, behind the drive wheel can withstand the ramps and the machine itself to provide the driving force, while the front wheel on the road for the initial compaction to bear the drive wheel produced Of the larger shear force; downhill when the impact of the self-weight of the tarpaulin is driven by the brake wheel to offset, only by the front wheel after the mixture is supported after the drive wheel to produce shear The ability of power.