Cone Calorimeter Tester of Standard ISO5660

Technology data:
1.)19inch standard instrument frame,17inch touchable screen pc insert
2.)cone heater powering rating:5000w,heat output rate:0~100kw/m2
3.)in the range of 50*50mm in the center surface of expose test sample ,center irradiation error no more than +-2%;
4.)sample size:100mm*100mm*50mm
5.)weight range:0~2000g;precision:0.1g;
6.)ignition system with safe cut device high pressure spark generator ,automatic positioning
7.)clockwise magnetic oxygen analyzer ,adopt pressure change of clockwise magnetic to measure the oxygen density
8.)density range:0-25%,T90<1.5S,zero drift:<0.5%month,measure data deviation<0.5%month,
9.)non-dispersion infrared co and co2 analyzer:co:0~1%;co2:0~10%;
Structure of cone calorimeter
1.)The combustion chamber: the conical heater, the 10KV ignition device, the control circuit, the windshield, etc..2.)Oxygen analyzer: imported high precision gas analyzer, oxygen analyzer can accurately test the content of oxygen in the air pipe in the time of the change, and then by the instantaneous oxygen concentration and oxygen consumption principle to determine the heat release of the material.3.)Load table: a device for measuring the quality of the sample, which can accurately record the mass change of the sample in the process of combustion4.)Smoke measurement system: He Ne laser emitter and double electron beam measuring device, which can be used to determine the specific extinction area (SEA) of the smoke in the smoke pipe.5.)Ventilation system: the ventilation system is a sample of the combustion products from the combustion chamber to the atmosphere in the device
Sample size100*100*50mmWeight range0-200gprecision0.1gDensity range0-25%T90<1.5SZero drift<0.5%monthMeasure data deviation<0.5%month