Good Quality AC3 690V 0.1A 150A Rated Current 43 AMP Thermal Overload Contactor RelayProduct DescriptionCharacteristics-Be mounted with CMC-32, 40 contactor directly
-Be mounted by guide rail or screw through mounting support(AZ-40H)
-Smaill size: 53mm width
-1NO+1NC tripping contact
-Class 10A tripping standard
-Phase-failure protection type: CTK
-Standard type: CTH
-Applicable ambient temperature -5-40
-Manual/automatic reset
-Design of trip free
-Bimetal element typeGeneral of thermal relay:Thermal Relay is a kind of automatic switching component with isolation function, which is widely used in
Remote control, remote measuring, telecom, automatic control, integration of machinery and
Electrification, electric and electronic equipments. It's one of the most important controlling
Components.Generally, thermal relays have the inductive organ (input part) that can reflect the input value (such as
Current, voltage, power, impedance, frequency, temperature, pressure, speed, light etc. ); Have
The executive organ (output part) that has the capability of switching the controlled circuit "on" or
"off"; Between the input and output parts, there is the medium organ (actuator) that can make
Input value coupling-isolation and drive the output part.As a kind of controlling component, generally, relay mainly has the following functions
1) To enlarge the range of control. E. G., when the controlling signal of a multi-contacts relay
Reaches a certain value, according to the different forms of the contacts, it can synchronously
Change over, close or open several circuits.
2) Enlargement. E. G., sensitive relays and medium relays can control a high-power circuit with
Minute controlling power.
3) To integrate signals. E. G., when several controlling signals are put into a multi-winding relay in
The stated form, the relay can realize the expectant controlling function by analyzing the different
Signals.
4) Automatization, remote control and monitoring. E. G., in automatic equipments, the relays and
Other electronic components can constitute program-controlled circuit, realizing the automatic
OperationApplications of thermal relay:Prepayment energy meter
Smart meter
Concentrated meter reading system
Street lamp control system
Compound switch, Combination switch
Automatic control device/ system
AMR system
Elevator control
Product DescriptionCR2-43 thermal overload relay for CC1-115/150Product Description CR2 Thermal Overload RelayDescriptionElectric value | AC 50/60Hz, 690V, 0.1~630A | Tripping class | 10A | Standard | IEC/EN 60947-4-1 | Mounting version | Plug-in: Available for CR2-13, 23, 33, 43; | b. Independent: Available for CR2-53, 63; |
Feature 3-phase bimetal Continuously readjustable current settings Temperature compensation Tripping indicator Test button Stop button Manual and automatic reset button Electrically separated 1N/O plus 1N/C contactSpecificationItem | Series No. | I/In | Operating time Tp | | Overload protection | 1 | 1.05 | >2h | Start from cold status | 2 | 1.2 | ≤2h | Start from heat status, right after item No.1 | 3 | 1.5 | ≤2min | Start from heat status, right after item No.1 | 4 | 7.2 | 2s<Tp≤10s | Start from cold status | Phase failure protection | 5 | Anyt two phases | Another phase | >2h | Start from cold status | 1.0 | 0.9 | 6 | 1.15 | 0 | ≤2h | Start from heat status, right after item No.5 | Assembly with contactorStandard | IEC60947-4-1 | Model of overload relay | Code | Rated current(A) | Recommended fuse type(RT16 is recommended) | Contactor Matched | aM | gG | CR2-13 | 1301 | 0.1~0.16 | 0.25 | 2 | CC1-09 CC1-12 CC1-18 CC1-25 CC1-32 | 1302 | 0.16~0.25 | 0.5 | 2 | 1303 | 0.25~0.4 | 1 | 2 | 1304 | 0.4~0.63 | 1 | 2 | 1305 | 0.63~1 | 2 | 4 | 1306 | 1~1.6 | 2 | 4 | 1307 | 1.6~2.5 | 4 | 6 | 1308 | 2.5~4 | 6 | 10 | 1310 | 4~6 | 8 | 16 | 1312 | 5.5~8 | 12 | 20 | 1314 | 7~10 | 12 | 20 | 1316 | 9~13 | 16 | 25 | 1321 | 12~18 | 20 | 35 | 1322 | 17~25 | 25 | 50 | CR2-23 | 2353 | 23~32 | 40 | 63 | CC1-32 | 2355 | 30~40 | 40 | 80 | CR2-33 | 3353 | 23~32 | 40 | 63 | CC1-40 CC1-50 CC1-65 CC1-80 CC1-95 | 3355 | 30~40 | 40 | 100 | 3357 | 37~50 | 63 | 100 | 3359 | 48~65 | 63 | 100 | 3361 | 55~70 | 80 | 125 | 3363 | 63~80 | 80 | 125 | 3365 | 80~93 | 100 | 160 | CR2-43 | 4366 | 80~104 | 125 | 200 | CC1-115 CC1-150 | 4367 | 95~120 | 125 | 224 | 4368 | 110~150 | 160 | 250 | CR2-53 | 5369 | 80~125 | 125 | 200 | CC1-115 CC1-150 CC1-185 CC1-225 | 5370 | 100~160 | 160 | 250 | 5371 | 125~200 | 200 | 315 | CR2-63 | 6372 | 160~250 | 250 | 400 | CC1-185 CC1-400 CC1-225 CC1-500 CC1-265 CC1-630 CC1-330 | 6373 | 200~315 | 315 | 500 | 6374 | 250~400 | 400 | 630 | 6375 | 315~500 | 500 | 800 | 6376 | 400~630 | 630 | 800 |
Overall and Mounting Dimension(mm) WiringItem | CR20-03 | CR20-13 | CR20-23 | CR20-33 | CR20-43 | CR20-53 | CR20-63 | Cross section area of conductor | Main ciicuti | Single core of stranded wire | 1~4 | 1~4 | 4~10 | 4~35 | 25~95 | 25~95 | 70~2x240 | Wiring screw | M3.5 | M4 | M4 | M10 | M6/M8 | M8 | M10 | Ausiliary circuit | Single core or stranded wire | 0.5~2.5 | 0.5~2.5 | 0.5~2.5 | 0.5~2.5 | 0.5~2.5 | 0.5~2.5 | 0.5~2.5 | Wiring screw | M3.5 | M3.5 | M3.5 | M3.5 | M3.5 | M3.5 | M3.5 |
Company ProfileChangan Group Co., Ltd, Established in 1987, comprising more than 62 factories with over 2500 employees and the whole corporation occupies 82000m2 ground during past 30years. We manufacture and export varieties of low voltage electrical appliance including all kinds of Circuit Breaker, Contactor, Relay, Switch, Solar Inverter etc.. 1. We already get the certificate of ISO9001, CE, SGS.CB for most of our products. 2. We have 30 years of manufacture and 20 years exporting experience. 3. We have completely sales service system, ensure every detail is going smooth. 4. We have new designed products each year by our R&D Department. 5. Perfect testing system ensure each product is qualified. 6. We have a good reputation in Russia, Turkey, Europe, South America, Mid-east and Africa Market. | | | | | | | | | | | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | | |
| | | | |
| | | | | |
| | | | |
Why CHANA?
1. We Are an electronics components manufacturer
2. We have 27 years experience of manufacturing Relays and other electronic components.
3. based on ISO 9001 & ISO14000 quality control system as our production standard;
4. We have completely sales service system, ensure every detail is going smooth.
5. We have new designed products each year by our R&D Department.