Cylinder Stone Scrubber, Sand Waser, Bucket Wheel Log Washer

Cylinder stone scrubber or cylinder stone washer is a kind of ore washing machine. The equipment is widely used in various hard-to-wash bulk ores. The washing machine can be divided into two types: cylindrical type and cylindrical plus screen strip type. The latter can divide the washed material into + 40mm and - 40mm two-stage products, and - 40mm can be further scrubbed by double spiral groove washing machine. The material can be divided into + 2mm and - 2mm two-stage products. The washing efficiency can reach about 98%. This combination is the most effective method for difficult-to-wash ores at present.
The working principle of the cylinder stone scrubber is as follows: the cylinder body is supported by four tugs, the motor drives the reducer, and the big and small gears drive the cylinder body to rotate at low speed. Aggregates containing mud and stone powder are fed into the rotating drum from the inlet port. A wear-resistant rubber liner with a certain angle is installed in the cleaning drum, which is continuously lifted and thrown down. It circulates many times during the movement from the feed end to the discharge end, and is washed by flushing water in the direction or in the opposite direction. The clean aggregates are discharged after sieving and dewatering by the discharge end drum. Wastewater containing sludge is discharged through orifice baffles at the discharging or feeding ends.
ModelDia. x Length (mxm)Max. Material Size (mm)Capacity (t/h)Barrel Speed (r/min)Power (kw)YTX1530Φ1.5x3.05070-1403055YTX1836Φ1.8x3.680120-2002575YTX2145Φ2.1x4.5150180-25021110YTX2450Φ2.4x5.0200230-30018160YTX2760Φ2.7x6.0250280-42016220YTX3075Φ3.0x7.5300400-500152x180