Desktop Economic Electrospinning System for The Nano-Fiber Material

Desktop Nano-fiber Electrospinning Unit with 2 Collectors and Heater & Humidity Monitor - MSK-NFES-3C
MSK-NFES-3C is one desktop and economic electrospinning system for the nano-fiber material research.
The system consistents of 30KV high voltage power source, two fiber collectors and temperature & humidity controlled fume hood.
It is an excellent tool for producing the ultrafine fiber with a diameter of 20 - 1000 nm.
FeaturesApplied Materials: Biopolymer, Macromolecule, Prepolymer Nano-fibers, etc.
Touch panel or software control of various features like mandrelrotatingspeed, duration, syringe pump flow rate, X-Y plate stage speed, etc.
Rotating mandrel target collector and the stationary X-Y plate target collector are provided with the system.
Desktop fume hood has features like the halogen light heating and venting port on top , huminidy display and the transparent door for monitoring the electrospinning processInput PowerAC 208~240 V single phase
Max power consumption: 1500 WHigh Voltage Power Supply0 - 30 kV single output, 0.5 mA max current
Digital Voltmeter (kV) and Digital current meter (mA)
Electrostatic removal device - discharge stick is integrated into the fume hood
Constant current / constant voltage modes available
Built-inarc protection circuit.Normally for the electrospinning process, current < 5μA. Please limit current< 20 μA to avoid high voltage arcing damageSyringe Pump &Nozzles
The standard 20 mL glass syringe
Pumping rate: 0.0001 mm/s - 1 mm/s
Maximum syringe diameter: 30 mm
Moving range: 0.01 mm - 90 mm
Syringe holder made of insulating material to work under high voltage conditions
In the standard package, only the standard high voltage alligator clip support is included.
Multiple Nozzle dispensing system is included and controlled by the touch screen PLCMandrel Collector
Designed for Electrospinning
Speed: 400 - 3800 RPM
Adjustable with stability: 100 RPM
Rotating mandrels could be used as a target to get the aligned continuous mesh of nanofiberX-Y Stage Plate CollectorDesigned for Flat Film Coating
Manual and Automatic Programmable Modes
PLC Control of speed and duration
X-stage speed: 10 - 100 mm/s
Y-stage speed: 10 - 100 mm/s
Plate dimension: 180 mm L x 180 mm W
Thin Film Coating Thickness Range: 0.1 mm - 100 mmHalogen Lamp HeaterHalogen lamp heaterwith thermal couple and digital temperature controller
Integrated into the fume hood for environmental heating up to 40 ºC
Max power: 1000 WFume HoodStand-alone unit with built-in power supply and features like heater, lightingand exhaust fan
Transparent glass windows on front and both sides for easy monitoring of the electrospinning process
Footprint: 600 mm x 600 mm x 780 mm
Construction material: Stainless Steel, Aluminum, and Glass.
Front door interlock for turning off high voltage output when the door is accidentally opened during the electrospinning process.Touch Screen PLC ControlThe Touch Screen PLC control of syringe pump, mandrel collector, X-Y plate collector and almost all of the key parameters
It is compatible to be connected to the laptop via RS232 port and USB adapterHumidity Monitor and ControlHumidity monitor is integrated into the fume hood for monitoring the humidity level(RH%)ranging from 2% - 95% WarrantyOne-year limited warranty with lifetime support ComplianceCE certified