Dgs Plastic Recycling Crushing Shredder for Recycling Made in China

DGS Plastic Recycling Crushing Shredder for Recycling Made in ChinaDescriptions

The DGS General Purpose Single Shaft Shredder has a457mm diameter profiled rotor made of solid steel, operating at aspeed of 74rpm. The concave ground, aggressive 4-way rotating knives are mounted in the grooves of the profiled rotor with special knife holders. This enables areduction of the cutting gap between the counter knives and the rotor which guarantees ahigh flow rate, low power consumption and maximum output of shredded material.

The hydraulically operated ram feeds the material automatically in the rotor's cutting chamber by load-related controls. The hydraulic system is equipped with high-pressure valves and volumetric flow controls which can be set according to the requirements of the input material.

Extremely robust pedestal bearing housings are mounted outside the machine and separate to the cutting chamber to prevent dust and dirt penetrating into the oversized bearings. This ensures along service life and minimum service and maintenance.

Power is transmitted from the motor by adrive belt via an oversized gearbox which is located on the shaft end on one end of the rotor.

A safety switch prevents machine startup when the front panel is open and the machine features emergency stop buttons on the machine body and control panel.

Specificatoins
Layout

FeaturesLarge diameter flat rotorMachined pocket knife holdersOptional hard facing -Concave ground square knivesRobust ram constructionHeavy duty guide bearingsUniversal couplingsLow speed, high torque geared driveReduced footprint (compared to horizontal pusher designs)Powerful hydraulic swing type ramBolt in drive shaftsOil cooling on ram and gearboxTwo speed hydraulic systemMultiple rotor designsRam comb plateAmp meter control
OptionsHydraulic screen cradleGearbox with shrink discRotor coolingPipe spacerTouch screen PLC Hopper mounted viewing mirrorIncreased motor driveHydraulic drive
ApplitionsPLASTICSRUBBERWOODBIOMASSPAPERALTERNATIVE FUELS (RDF/SRF)DOMESTIC &COMMERCIAL WASTE
FAQ
DGM is aFactory with 10 years experience in Machinery Manufacturing, and 20 years experience in Technology.Q2: Will we provide pre-sale services ?
DGM consists of experienced specialists, we will offer asuitable solution according client's requirement in time.Q3: Is our after-sales service excellent ?
At DGM we have ahighly trained team of service personnel to handle all manner of customer service enquiries. Whether it is replacement parts, technical assistance, or just general operation advice we offer our customers genuine 24/7 support and after sale service.

We have an international network which ensures wherever you are in the world you receive localized high level support.

Our technical team has decades of experience in the field of size reduction and recycling and we are on hand to offer assistance in installation, commissioning, staff training and general technical assistance.

Q4: Where is your factory?
Address: No.1.Fengqi Road, Huishan District ,Wuxi City, Jiangsu Province, ChinaQ5: what is your contact informatoin?
Fax: +86 510 8357 0210
Telephone: +86 510 8357 2002
Mobile :+86 18762812155Q6: Could We Visit Your Factory and Test the Machine?
We warmly welcome you to visit our factory anytime,and we are very glad to test our machine with your raw material.