Diesel GeneratorController Model 5110 for DeepseaControl Module DSE5110 The Model 5110 is an automatic engine control module. The module is used to automatically start and stop diesel and gas generating sets that indicate non electronic engines.The module can work on both 12V and 24V, besides, it has 30 items for its function .
Power Supply8 to 35 Vdc ContinuousCranking Dropouts:Able to survive 0 V for 50 ms, providing supply was at least 10 V
before dropout and supply recovers to 5V.Max CurrentOperating 425mA at 12 V & 215mA at 24 V; Standby 250 mA at 12 V & 125 mA at 24 V.Start Relay Output:16 Amp DC at supply voltage.Fuel Relay Output:16 Amp DC at supply voltage.Auxiliary Relay Outputs:5 Amp DC at supply voltage.Charge Fail / ExcitationRange0 V to 35 VMaximum operating current320ma at 12V, 215ma at 24vMaximum operating current175ma at 12V, 95ma at 24vAlternatorInputRange:15V(L-N) to 333V AC (L- N) absolute maximumAlternator Input Frequency:50 - 60 Hz at rated engine speed (Minimum: 15V AC Ph-N)Magnetic Pick-upVoltageInputRange:+/- 0.5 V to 70 V PeakMagnetic Input Frequency:10,000 Hz (max) at rated engine speedMAINS (UTILITY) SENSING INPUT RANGE(DSE5220 only)
15V (L-N) to 333V AC (L-N) absolute maximumMAINS(UTILITY)SENSINGINPUTFREQUENCY(DSE5220 only)
50-60 HzMAINS (UTILITY) & GENERATOR LOADING
RELAY OUTPUT(DSE5220 only)
8A AC 250VGenerator loading Relay Output:8 Amp AC 250V.Mains loading Relay Output:8 Amp AC 250VPanel Cutout:220mm x 160mm ( 8.7" x 6.3")