Digital Display Soldering Iron Tips Soldering Sensor Thermometer Tester

Description:
• Lightweight, easy-to-replace sensors provide accurate measurement of tips for verification or calibration processes.
• When the MAX HOLD feature is enabled, the thermometer will display the maximum temperature measured.
• To preserve battery life, the auto shutoff feature turns the thermometer off when not used for three minutes.
• The thermometer design allows for easy measurements from right or left handed operators.
• The sensor has a special metal alloy coatingthat resists corrosion and oxidation.
• Note: the sensor can measure temperatures up to 500°C.

Detail Infomation:

Model number

BK-101

Temperature

Resolution

1ºC(1ºF)

Measurement Range

0 - 700ºC (32 - 1300ºF)*1

Precision

±3ºC (between 300 and 600ºC)/
±6ºF (between 572 and 1112ºF)
±5ºC/10ºF (other than above)

Sensor

K (CA) type thermocouple

Voltage

Resolution

0.1mV

Measurement Range

0 to 40mV (AC)

Precision

± (5% of reading +1 digit)

Registance

Resolution

0.1Ω

Measurement Range

0 to 40Ω

Precision

± (5% of reading +1 digit)

Display

LCD

3 1/2 digits

MAX HOLD

(Refer to "MAX HOLD function.")

Power Consumption

100V-2.6W, 110V-2.9W, 120V-2.6W,
220V-2.7W, 230V-2.8W, 240V-3.0W

Dimensions

200(W)x50(H)x120(D) mm /
7.9(W)x2.0(H)x4.7(D) in

Weight

1kg

Ambient Temperature/
Humidity Range

0 - 40ºC (32 - 104ºF), 20 - 90%RH
(Non condensation)

Environmental Condition

Applicable rated pollution degree 2
(According to IEC/UL61010-1)

Notice:
•Temperature sensor (191-212) can only be used to measure temperatures below 500ºC (932ºF). To measure higher temperatures, use an applicable temperature probe (see "OPTIONS").
When the tip is not in contact with the conduction plate.
• When a sensor is not attached nor burns out, an alarm symbol of Burnout is displayed. If this alarm occurs, replace/attach with a new sensor. The same alarm symbol is also displayed when a value over the possible measurement range is detected.

Product Detail Photo:

Temperature Control Features:

• Suitable for Lead-Free Solder:Good temperature response using a fine CA wire sensor (φ0.2mm);

• Disposable sensor always maintains accurate temperature measurment(Replace sensor when the measuring point underwent degradation)

•Sensor has the twice service life than conventional ones.

• Dimensional Measurement:Allows you to measure from any desired direction according to tip shape

•Auto Shut-Off Function:If no measurement operation is performed within 3 minutes, the power will be automatically shut off.

• MAX HOLD Function:When the button "MAX HOLD" is pressed, "MAX HOLD" will be displayed and the highest temperature of Iron will be held in the display.

• Easy-to-read temperature:Large and clear display;Digital temperature display make to read it accurately

• Compact Size:Convenient to carry and saves your workspace

•Sensor replacement is quick and easy Easy-to-read digital temperature display

Best Quality100% inspection before shipments. Zero mistake is our goal.Cost DownWe always offer competitive prices and help our customers to cost down.Fast DeliveryWe keep alot of stock for regular products. Usually, our lead time is only 3days.
Q: What is your MOQ?
A: only 1pcs also is ok.Q: What is the shipping port?
A: The shipping port is shenzhen/hongkong or as your requirement.Q: What is the delivery time?
A: The delivery is about 3-10 days after your order.Q: What the time of making sample?
A: about 3-5 days.Q: How about the sample?
A: We can supply sample. But we should charge the sample fee. And we will return it after your order confirmed