Direct Manufacturer Wheel Bucket Type Sand Washer

1. Product Application ofDirect manufacturer wheel bucket type sand washerBucket Wheel Sand washing machine is used to remove the dust in sand. Sand washer aims at improving the quality of sand. The materials include the required gravel in building-site, gravel factories, hydropower station and concrete dam site, post and electric pole factory, casting-70 sand, glass factory's quartz sand and refilling pressure sand.Bucket Wheel Sand washing machine is widely used for cleaning materials in the following industries: quarry, minerals, building materials, transportation, chemical industry, water conservancy and hydropower, cement mixture station. So we design this machine ,which is mainly used for washing , selecting dewatering construction materials and sand materials.2. Working Principle ofDirect manufacturer wheel bucket type sand washerThe electric motor runs slowly with the impellor after decelerated by the belt, decelerator and gears wheel. The sand and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other. The impurity covering the sand is washing away. At the same time, add more water, the strong water flow will take away waste and some low-weight wastes from washing launder. Through the above process, the washing function is finished. The clean sand and stone is lift up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder. On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used. Finally, the sand and stone goes to the out launder from the rotary impellor to finish the washing task.3. Main Features ofDirect manufacturer wheel bucket type sand washer(1). There is little loss for medium-sized or fine sand and stone powder.
(2). There is no wearing parts except the screen mesh.
(3). The mechanical failure ratio is much lower than Spiral Sand Washer.
(4). It has a longer working life and lower maintenance frequency.4.Technical Parameter ofDirect manufacturer wheel bucket type sand washer
ModelWheelDia(mm)
Capacity
(t/h)
SandreturnCapacity(t/h)
RotateSpeed(r/min)Power
(kw)Weight
(kg)GXS2010Φ20008-403-81-242000GXS2612Φ260020-1005-151-25.53500GXS2814Φ280030-1508-200.8-1.5115200GXS3014Φ300050-20010-300.8-1.5157800GXS3214Φ3200100-28015-400.8-1.5158800GXS3616Φ3600130-46030-600.8-1.518.514200
5. Our service1) Installation and guidance
When the machine arrives at your company, we will dispatch our technicians to your company to guide the installation and commissioning at site. User should pay for the following fees air tickets, boarding and lodging and traffic in client's factory.(2)Technical training
We provide free technical training service to your stuff. Training content contains the main work principle of machine, operating regulations, maintenance methods and steps, safety, etc.(3)Warranty:
Three guarantees of our product quality, warranty for one year (not include man-made damaged). We will maintain the machine for free for the quality problem. If the damage is caused by your improperly operation, the cost of the maintenance burden by you. we also provide you the life-long follow-up service.
6.our copmanyGongyi Hengchang metallurgy Building Material Equipments plant is a professional manufacturer specializingintheproductionof mineral beneficiation equipments, sand and stone crushing equipments, briquetting equipments, coal preparation equipments, drying and calcining equipments, cement plant equipments and compound fertilizer equipments.