Characteristics:Grinding disc with holes shall provide high impact and shear to grinding media and reduce dead area largelyMaterial of grinding disc and spacer: S.S.440C/PU/wearable nylon/ ZrO2Material of grinding chamber: S.S.440C/PU/wearable nylon/ceramicDischarge of products: with dynamic/static separating ring or static separating screenSealing mode of main shaft: double face mechanical sealSealant circulating in mechanical seal is compatible with solvent in grinding media to avoid pollution to grinding media.Cooling jacket outside sealant tank and cooling jacket outside grinding chamber are adopted to cool down mechanical seal and grinding media.Adjustable range of pressure limit switch at material inlet: 0-6 barAdjustable range of temperature limit switch at product outlet: 0-100ºCFault alarm on control panel shall be activated in such cases:*Pressure of cooling water: too low
*Working pressure in grinding chamber: too high
*Temperature at product outlet: too high
*Circulation of coolant for mechanical seal: not work
*Level of coolant for mechanical seal: too low
*Motor load: overloadApplication: Wet grinding of paint, ink, printing ink, dye, pesticide, color paste, non-mineral filler, etc.Technical data:ModelJWS-5JWS-15JWS-30JWS-50JWS-100JWS-300Main Motor Power(KW)5.511223775132Effective Chamber Volume(L)5153050100300Output Capacity(L/h)20-10050-150100-300100-400100-1000800-2000Cooling Water Consumption(m3/h)1.41.72.02.42.68Compressed Air Pressure(MPa)0.4-0.6Grinding mediaΦ0.4-1.6mm 94.50%+ ZrO2 beadsMaterial feedingBy diaphragm pump/gear pump