Dispension Kneader for Rubber and Plastic/Dispersion Kneader Machine

Dispension Kneader for Rubber and Plastic:The machine is applicable for plasticating and mixing rubber and plastic, as well as applicable for mixing and kneading sticky materials.Characteristic:
This bale cutter mainly consists of rubber knife, frame, cylinder, base, auxiliary table, hydraulic system, and electric system. The lead is casted on the base under the rubber knife for protecting the edge of the rubber knife. When cutting the raw rubber, put the raw rubber under the rubber knife, then press the start button, the knife can cut the rubber. Two limit switches are installed on the frame to control the reversal valve to change the movement direction of the rubber knife, at the same time it protects the cover of the cylinder.Model
X(S)N-10x32
X(S)N-20x34
X(S)N-35X30
X(S)N-55X30
X(S)N-75X30
X(S)N-110x30
Total volume of mixing chamber
L
25
45
75
125
180
250
Working volume of mixing chamber
L
10
20
35
55
75
110
Driving motor power
KW
15
22
55 45
75 55
110 95
185
Tilting motor power
KW
1.1
1.5
2.2
2.2
4
4
Tilting angle
°
140
140
140
140
140
140
Rotational speed of the rotor(front/rear)
r/min
32/23.5
34/28
30/24.5
30/24.5
30/24.5
30/24.5
Pressure of compressed air
MPa
0.5~0.8
0.5~0.8
0.5~0.8
0.6~0.8
0.6~0.8
0.6~0.8
Capacity of compressed air
M3/min
≥0.5
≥0.7
≥0.9
≥1.0
≥1.0
≥1.5
Pressure of cooling water(rubber mixing)
MPa
0.2~0.4
0.2~0.4
0.3~0.4
0.3~0.4
0.3~0.4
0.3~0.4
Pressure of heating steam(plastics mixing)
MPa
0.5~0.8
0.5~0.8
0.5~0.8
0.5~0.8
0.5~0.8
0.5~0.8
L
mm
2580
2630
3200
3280
3330
3930
Overall dimensions
W
mm
1300
1520
1900
1930
2620
3000
H
mm
2280
2550
2950
3070
3340
3660
Weight
Kg
3300
4500
6500
7500
10500
14500