Disposable Face Mask Machine production line

Product Description

Face Mask Machine Introduction

This machine is mainly used for automatic forming of flat mask. Unwinding the whole roll of cloth, automatically folded and wrapped; unwinding the whole roll of rubber strip, cut to fixed length and then put into the wrapped cloth; both sides sealed by ultrasonic welding machine; then cut to form; send the mask to ear belt welding stations. Then collect the completed mask by laminating machine.

Specification

Num

Name

Quantity

Note

1

filter cloth/filter cotton/Unwinding machine for water absorption layer

3 sets

standard configuration

2

unwinding machine for rubber strip

1 set

rubber strip accuracy ±1mm

3

aligning machine for rubber strip

1 set

width 3-7mm

4

driving and cutting machine for rubber strip

1 set

width 3-7mm

5

folding machine for cloth

1 set

6

welding and sealing machine

1 set

7

driving machine for cloth

1 set

8

fanfold machine for cloth

1 set

9

welding and sealing machine, for side

1 set

10

sealing machine

1 set

11

separating machine

1 set

12

2ear belt welding machine

2 set

13

Laminating machine

2 set

14

operator panel

1 set

 The above is theDiagram (Picture for reference only, subject to actual product)

Installation and configuration

(1) Dimension: 6800mm(L)×3600mm(W)×1900mm(H)(Slight change in actual size);(2) Weight: ≤2100kg,the ground load-bearing>300KG/M²;(3) Power: 220VAC±5%,50z,rated power 11kW ;(4) Air compression:0.5~0.7MPa,rate of flow,300L/min;(5) Environment: Temperature 10~35℃,humidity -35%HR, No flammable or corrosive gas, no dust (cleanliness no less than 100000).

Item

Qty

Width(mm)

Outside dimension (mm)

Inner dimension(mm)

Weight(kg)

nonwoven cloth or melt blown cloth

3

170~200

Φ600

Φ76.2

15

rubber strip

1

3-7

Φ400

Φ76.2

25

ear belt

4

160*3