E27 Bulb Lamp Holder PIR Motion Sensor for Popular Item

Popular Infrared Motion Pir sensor IP44 ES-P06 specifications:
1. Power source: 220V/AC-240V/AC; 100V/AC-130V/AC
2. Power frequency: 50/60Hz
3. Time delay: Min. 10± 3sec.; Max. 7± 2min
4. Detection angle: 360°
5. Ambient light: <10lux~2000lux
6. Working temperature: -10-+40ºC
7. Detection distance(22ºC): Max. Diameter 12m
8. Rated load: 1200W (220-240V/AC); 800W (110V/AC); 3000W(220-240V/AC); 1500W (110V/AC)
9. Power consumption: 0.45W(static 0.1W)
10. Installation height: 0.5-4.5m
11. Detection motion speed: 0.6-1.5m/s
12. Working humidity: <93%RH
13. Switch Function: lux/time/senTESTAfter installation, Turned LUX knob clockwise to the maximum (SUN). Turned time knob anti-clockwise to the minimum(-).Turn on the power, the sensor will be electrify and warm-up, 30 sec later, the item will be entered into working estate. 5~10 seconds after the light goes out for the first time and then sensing, the load should be worked.Turns LUX knob anti-clockwise to the minimum. If it is tested under the circumstance below 3LUX, load should not work after induction load stop working; but if you cover the detection window with opaque objects (towel etc), the load works. Under the condition of no induction signals, the load should stop working within 5-15 sec.Welcome to use ES-B03B Infrared motion sensor!
The product adopts good sensitivity detector, integrated circuit. It gathers automatism, convenient safe, saving-energy and practical functions. It utilizes the infrared energy from human as control-signal source, it can start the load at once when one enters detection field. It can identify day and night automatically. It is easy to install and used widely.

Detection Range: 360°
Power Source: 110-240V/AC
Power Frequency: 50/60Hz
Rated Load: <60W
Detection Distance: 7m max(<24ºC)
Time-Delay: min. 10sec±3sec
max. 5min±1min
Ambient Light: 10-2000LUX (adjustable)
Installation Height: 2m-3.5m
Fix the holder in the place where you will want to install according to right figure.After installation of the sensor, connect with lamp, then you could test it.After installation, Turned LUX knob clockwise to the maximum (SUN). Turned time knob anti-clockwise to the minimum(-).Turn on the power, the sensor will be electrify and warm-up, 30 sec later, the item will be entered into working estate. 5~10 seconds after the light goes out for the first time and then sensing, the load should be worked.Turns LUX knob anti-clockwise to the minimum. If it is tested under the circumstance below 3LUX, load should not work after induction load stop working; but if you cover the detection window with opaque objects (towel etc), the load works. Under the condition of no induction signals, the load should stop working within 5-15 sec.Note: when testing in daylight, please turn LUX knob to (SUN) position, otherwise the sensor lamp could not work!