E7018 Covered Welding Electrode by Acme Weldcut

Leave Your Order to ACME WeldCut, and then Enjoy Your Time with Coffee. Let Me Tell You Why...Welding ElectrodeAWS A5.1 E7018 by ACME WeldCut, Quality Praised by customersin United Arab Emirates, Philippines, Malaysia, India, Saudi Arabia, and South Africa.Key Features:
Beautiful Welding Bead Appearance.
Slag Easy to Remove.
Excellent in Vertical-Down Welding.
OEM Services
You havebest-sellingtrademarks in your country ? Well, we offer OEM packaging under your trademarks. No additional cost. We eyeon every detail and never damage your brands.
Quick Shipment:
Our factory has capacity of 10000 tons per year. As a result, we can ship your order faster than others. We always ship our goods via direct vessels via Qingdao or Tianjin port.
Professional Services:
With 10 Years' Experience in Welding & Cutting Industry, we are able to serve our customers very well. We keep full tracking of every order after sales. We always stand in our customers' side to quickly solve problems if any. Our persons continuously study the market and act upon customers' updated requests.We Offer Free Samplesfor Your Approval.Factory Show:
FAQ:
Q1: How Can You Make Sure Good Quality ?
A1: From 3 Steps, We Make Sure that We Supply Good Quality Welding Electrodes.
The 1st, We Select Long Terms Cooperation Steel Factory, this way, Quality is Very Stable.
The 2nd, We Use Advanced Production Lines.
The 3rd,We Offer Free Samples for Your Approval.Q2: What's the Delivery Time ?
A1: For 1 x 20 GP container, we can finnish production within two weeks. More than this quantity, we need to discuss.Q3: What is the Port of Loading ?
A1: Almost all orders are shipped from Qingdao port, and usually via Direct Vessels.
Descriptions:
AM-7018(AWS A5.1 E7018)is a general purpose, low hydrogen electrode for welding 490 MPa class high tensile steel. AM-7018 has a very good deposition rate, producing steady arc with low spatter and medium penetration.
Typical Chemical Composition of Weld metal (wt%):
Carbon (C)................0.07
Manganese (Mn).........…..1.38
Silicon (Si).................0.47
Phosphorus (P).............0.020
Sulphur (S)................0.009
Typical Mechanical Properties:
Yield Strength: 518 MPa
Tensile Strength: 604 MPa
Elongation: 28%Note on Usages:
Rutile type electrodes do not normally require re-drying prior to use, however, if suspected of being damp, it should be re-dried at 100 - 120 ºC for 1 - 2 hours.Size and Recommended Current Range (AC or DC):Size AMP(F)AMP (V & OH)2.6 mm55-8550-803.2 mm90-13080-1204.0 mm130-180110-1605.0 mm180-240150-200.............ACME WeldCut - A Trusted Name in Welding & Cutting Industry.