Easily Bent Rubber Cable Insulation Sleeve

Easily Bent Rubber Cable Insulation Sleeve
Description
RUBNS-OLC,Easily Bent Rubber Cable Insulation Sleeve, the innovative product design, ease of installation. Use silicon rubber material, anti-aging, corrosion resistance, with good resistance to corona resistance, high temperature performance, especially suitable for the protection of the bare wire. Widely used in substation protection works and railway catenary system, a significant effect in the cross-lines.
Voltage RatingVoltage(KV)≤10KV≤35KV≤110KV≤220KVThickness2.0±0.3mm2.6±0.4mm4.0±0.5mm6.0±1.0mm
Application:
Technical Data
DimensionsLJ Stranded Wire Cross-sectional Area(Nominal)O.D. Of LJ Stranded Wire(mm)Silicone Rubber Sleeving Covers Models(mm)509.00127010.80129512.481712014.251715015.752018517.502021018.7524.224020.0024.230022.4024.240025.903050029.123263032.673580036.9039.8LGJ Stranded Wire& LGJF Stranded Wire Cross-sectional Area(Nominal)O.D. Of LJ Stranded Wire(mm)Silicone Rubber Sleeving Covers Models(mm)35--1250--15.670/1011.41770/4013.61795/1513.611795/2013.871795/551617120/714.520120/2015.0720120/2515.7420120/701820150/81620150/2016.6720150/2517.120150/3517.520LGJJ-12015.520LGJJ-15017.520LGJQ-1501620185/101824.2185/2518.924.2185/3018.8824.2185/4519.624.2210/101924.2210/2519.9824.2210/3520.3824.2210/5020.8624.2240/3021.624.2240/4021.6624.2240/5522.424.2LGJJ-18519.624.2LGJJ-24022.424.2LGJQ-18518.424.2LGJQ-24021.624.2400/2026.9132400/2526.6432400/3526.8232400/5027.6332400/652832400/9529.1432500/353032500/453032500/6530.9632800/5538.439.8800/7038.5839.8800/10038.5839.8
Installation Instructions
1. Clean the inside of the RUBNS-OLC with cleaning cloth and alcohol fluids until the inside is
clean without dust;2. Connect the pointed plastic mouth to the body of RTV silicone rubber adhesive bottle. See illustration 1 above.3. Smear RTV silicone rubber adhesive all over the concave channel of the RUBNS-OLC
uniformly as showed in illustration 2 above4. Uniformly smear the two flat fringes of the concave channel with RTV silicone
rubber adhesive as the illustration 3 shows5. Connect the bulging part of the RUBNS-OLC on one side into the concave channel of the
other side and squeeze the connecting part from one end to the other as illustration 4 indicates