Electric Radiant Floor Heating MatUL Certificate E481865
SenphusElectric Radiant Floor Heating Mats are just 1.5mm thickness, which can save your installation materials.With better quality alloy wire,SenphusElectric Radiant Floor Heating Mats can guarantee 18 years.
Advantages:
1. more choice for mat and heating wire size, material etc
2 .the alloy wire are controlled well by all kinds of analysis equipments.
3.many common size alloy wires in the stock and can guarantee the urgent lead time.
Electric Radiant Floor Heating Mat Pictures Show
Electric Radiant Floor Heating Mat Technique DataItemNo.Voltage(V)Power(W)SquaremeterSize(SQ,FT)SHIHM-130W-120v-0.7M2120910.77.5SHIHM-130W-120v-0.9M21201170.910SHIHM-130W-120v-1.4M21201821.415SHIHM-130W-120v-1.9M21202471.920SHIHM-130W-120v-2.8M21203642.830SHIHM-130W-120v-3.3M21204293.335SHIHM-130W-120v-3.7M21204813.740SHIHM-130W-120v-4.6M21205984.650SHIHM-130W-120v-5.6M21207285.660SHIHM-130W-120v-6.5M21208456.570SHIHM-130W-120v-7.4M21209627.480SHIHM-130W-120v-8.4M212010928.490SHIHM-130W-120v-9.3M212012099.3100ModelVWOhmLengthM2mSHIHM-160-1.0M212016090.011.11SHIHM-160-1.5M212024060.016.651.5SHIHM-160-2.0M212032045.022.22SHIHM-160-2.5M212040036.027.752.5SHIHM-160-3.0M212048030.033.33SHIHM-160-3.5M212056025.738.853.5SHIHM-160-4.0M212064022.544.44SHIHM-160-5.0M212080018.055.55SHIHM-160-6.0M212096015.066.66SHIHM-160-7.0M2120112012.977.77SHIHM-160-8.0M2120128011.388.88SHIHM-160-10.0M212016009.011110SHIHM-160-12.0M212019207.5133.212
Installation Guide
First , prepare the floor, the floor is clean and dry, you can install the heating mats on the floor directly;you can also install the insulation board andthealuminum foil in advance.
Don't laythe insulation board andthealuminum foil under the toilet,the bathtub , the floor drain area and other bathroom furniture.
Second, measure up
Third, cut, turn and affix matting system
Don't lay the heating mat under the toilet,the bathtub , the floor drain area and other bathroom furniture.
Just Remember
Wire should be laid at a minimum of 50mm and should NEVER cross
Never cut the wire
Do not overlap the wire
Wire should befixedwith the tapesor the clips
The heating mats should be installed on the same level
Test the resistance and the insulation with the universal meter again
Fourth, Installing the Thermostat and Floor Probe
All electrical work should be completed by a qualified electrician
Atop the finished heating mats are cement layer, then the tiles.