Electromagnetic Flow Meter

Highlights
- Measurement is not affected by the variation of flow density, viscosity, temperature, pressure.
- No obstacle in the pipe, no pressure-loss and lower requirement for straight pipeline
- Programmable low frequency square wave field excitation, improving measurement stability.
- Full-digital processing, high noise resistance and reliable measurement
- Highflow turn down 80: 1
- High definition LCD display with backlight
- RS485, RS232, HART interface supports digital communication.
- Intelligent empty pipe detection and electrodes resistance measurement diagnosing.
- SMD component and surface mount technology (SMT) are implemented to improve the reliability.
- Power off time memory functionApplication:
Electromagnetic Flow Meter can be used to measure the volume flow of conductive fluid in a closed pipeline. It is widely applied in the flow measurement and control in the fields of chemical and petroleum industry, metallurgy industry, water and waste water, agriculture and irrigation, paper making, food and beverage industry and pharmaceutical industry.Specification:Electromagnetic Flow Meter
Pipe size: 15mm to 3000mm
Precision: ± 0.5%
Max pressure: ≤ 4.0MPa
Conductivity: ≥ 5μ S/cm (Purity water>20μ S/cm )
Output signal: 4 - 20mA; Pulse 0-2kHz; RS485; HART
Medium temperature: 0-120 Deg C
Power Supply: 220VAC or 24VDC
Flange material: SS/CS
Converter Type: Integrated, Remote
Protection: IP65/ IP67/ IP68
Liner material: Chloroprene rubber; Polyurethane; PTFE
Display: Instantaneous flow rate, total flow, flow velocity
Flowing Direction: Forward, Reverse
Electrode Material: 316L, PT, Ta, Ti, HB, HC
Electrode Type: Standard, blade, removable
Alarm (N. O. ): Empty, excitation, high/low flow rate limit
Ambient temperature: -25 - +60Deg C, Humidity: 5-90%
Explosion-proof: ExibII CT4