Environmental Climatic Testing/Test Chamber with Temperature and Humidity Controller

Environmental Climatic Testing/Test Chamber with Temperature And Humidity Controller
The usage:
Environmental testchamber isdesigned for testing the capability of heat-endurance, cold-endurance, dryness-endurance, and humidity-endurance, suitable for quality control of the industries of electron, electrical equipment, vehicle, metal, foodstuffs, chemistry, building materials, luggage, adhesion tape, printing, packaging, etc.
Standrad Features
(The table parameters for the company Standard Model parameters, we support customer customization parameters)ItemEnvironmental Test ChamberInternal dimension(W*D*H) 1000*1000*1000mm External dimension(W*D*H) 1500*1380*1900mmTemperature range-40~+150ºCTemperature Accuracy±1ºCHumidity range20~98%R.H. (Refer Image below)Humidity accuracy±3%R.HCooling speed1ºC/min in average (without loading)Heating speed3ºC/min in average (without loading)Internal chamber materialSUS#304 stainless steel, mirror finishedExternal chamber materialStainless steel with paint sprayCooling methodAir coolingControllerLCD touch screen, programmable control temperature and humidity
Can set different parameter for cyclic testInsulation material50mm high density rigid Polyurethane foamHeaterExplosion-proof type SUS#304 stainless steel fins radiator pipe heaterCompressorFrance Tecumseh compressorLightingHeat resistanceTemperature sensorPT-100 dry and wet bulb sensorObservation windowTempered glassTesting holeDiameter 50mm, for cable routingSafety protection deviceProtection for leakage
Over-temperature
Compressor overvoltage and overload
Heater short circuit
Water shortage(The table parameters for the company Standard Model parameters, we support customer customization parameters)ApplicationsTo simulate test environment with different temperature and humidityCyclic test includes climatic conditions: holding test, cooling-off test, heating-up test, moistening test and drying test…Cable port with flexible silicone plug for cable routing to provide the condition of test unit under operationUncover test unit weakness in a short-term test with accelerated time effect
Chamber Design Features 1.High performance and quiet operation (68 dBA) 2. Space-saving designed for flush installation to wall 3.Full thermal break around doorframe 4.One 50mm diameter cable port o left, with flexible silicone plug 5.Direct water supply connection for continuous operation 6.Accurate wet/dry-bulb humidity measurement system for easy mantain
Programmable ControllerPIC controller for test chamberStep types include: ramp, soak, jump, auto-start, and endRS-232 interface to connect computer for output
Range - 70 to 150°C Temp/HumidityHD-E702-100-7HD-E702-150-7HD-E702-225-7ModelHD-E702-408-7HD-E702-800-7HD-E702-1000-7Temp-onlyHD-E702-100T-7HD-E702-150T-7HD-E702-225T-7ModelHD-E702-408T-7HD-E702-800T-7HD-E702-1000T-7Temperature Range:-70°C ~150°C Cooling Capacity ~ 2.5 kW at -50°C~ 3 kW at -50°C~ 5 kW at -50°C~ 6.5 kW at-50°C~ 8.5 kW at -50°C~ 9 kW at - -50°CHeating System~ 5 kW ~ 5 kW~ 5.5 kW~6.5 kW~ 8.5 kW~ 9 kW Temperature Fluctuation:±0.5°CTemperature Gradient:±0.5°C~±0.2°CHeating Rate†:≥3ºC / min average ( Advance model 5 - 15 ºC / min)Cooling Rate†:≥1ºC / min average (Advance model 5 - 15ºC / min)Humidity Range:10%~95%RH (Ref to Normal Humidity Range Diagramed)Humidity Fluctuation:±1.5%RH~±2.0%RHHumidity Gradient:±3%RHDimensionsWorkspace dimensions
(WxDxH)mm:500x400x500
HD-E702-100600x500x500
HD-E702-150750x500x600
HD-E702-225850x650x800
HD-E702-4081000x1000x800
HD-E702-8001000x1000x1000
HD-E702-1000Exterior dimensions
(WxDxH)mm:1400x850x1050 1500x950x1050 1650x950x1150 1750x1050x1350 1900x1450x1350 1900x1450x1550 Site RequirementsElectrical Supply:208V 3Ø 60Hz or 230V 3Ø 60Hz (customer specific) Humidity WaterDistilled waterCondensate Drain:1/2" hose connection (gravity drain)
Range - 40 to 150°C Temp/HumidityHD-E702-100-4HD-E702-150-4HD-E702-225-4HD-E702-408-4HD-E702-800-4HD-E702-1000-4Temp-onlyHD-E702-100T-4HD-E702-150T-4HD-E702-225T-4HD-E702-408T-4HD-E702-800T-4HD-E702-1000T-4Temperature Range:-40°C ~150°C Cooling Capacity ~ 2 kW at -20°C~ 2.5 kW at -20°C~ 4.5 kW at -20°C~ 5.5 kW at-20°C~ 8 kW at -20°C~ 8.5 kW at - -20°CHeating System~ 5 kW ~ 5 kW~ 5.5 kW~6.5 kW~ 8.5 kW~ 9 kW Temperature Fluctuation:±0.5°CTemperature Gradient:±0.5°C~±0.2°CHeating Rate†:≥3ºC / min average ( Advance model 5 - 15 ºC / min)Cooling Rate†:≥1ºC / min average (Advance model 5 - 15ºC / min)Humidity Range:10%~95%RH (Ref to Normal Humidity Range Diagramed)Humidity Fluctuation:±1.5%RH~±2.0%RHHumidity Gradient:±3%RHDimensionsWorkspace dimensions
(WxDxH)mm:500x400x500
HD-E702-100600x500x500
HD-E702-150750x500x600
HD-E702-225850x650x800
HD-E702-8001000x1000x800
HD-E702-8001000x1000x1000
HD-E702-1000Exterior dimensions
(WxDxH)mm:1400x850x1050 1500x950x1050 1650x950x1150 1750x1050x1350 1900x1450x1350 1900x1450x1550 Site RequirementsElectrical Supply:208V 3Ø 60Hz or 230V 3Ø 60Hz (customer specific) Humidity WaterDistilled WaterCondensate Drain:1/2" hose connection (gravity drain)
about Us
HAIDA INTERNATIonALis a professional manufacturer of various kinds of testing equipments over 24 years. HAIDA products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and applicable to all scientific research units, quality inspection institutions and academic fields.
Our Service