F-male connector for RG6 cable(outdoor type ,be used by compression tool)
SFJT-RG6CP
Features:
* High quality copper body with bright nickel plating.* Good specification to waterproof, prevent from corrosion.
* Connect with RG6 and -5 cables.
* Return Loss: 5-300 MHz≥28dB ,
300-1000MHz≥26dB.
Install Size: Unit,mmAfter compress:
Before compress:
Specification:
NO.ItemF-male connector for RG6 cable1connector typeF-male 3/8-32UNEF2Working frequency 5MHz~1000MHz3Impedance75Ω4Insertion loss5MHz~300MHz≤0.05dB5300MHz~1000MHz≤0.1dB6Return loss5MHz~300MHz≥28dB7300MHz~1000MHz≥26dB8RFI ≥100dB9Contact conductorInternal conductor≤10mΩExternal conductor≤5mΩ10Insulating resistance(DC500V)≥1000MΩ11Withstanding voltageAC1.5KV,1min,No breakdown12Antifogging(SCTE standard: ANSI/SCTE 60 2004 red dyes,120h,High and low temperature circulation,Test conditions please turn to Note 1 below this form)No leakage13Sub test (24h)Insulation resistance≥200MΩ,withstanding voltage meet the requiement of the item 11on this form14Normality of oisture and heatWithstanding voltage≥800V(40ºC±2ºC,93%±3%,24hx21)Insulation resistance≥250MΩ(40ºC±2ºC,93%±3%,24hx21)15High temp. insulation resistance≥500MΩ(85ºC±5ºC,16h)16Low temp. insulation resistance≥1000MΩ(-40ºC±5ºC,2h)17Torsional intensity of connector ≥3.39N·m18Length of connecor(finished installation)≤25mm19Connection ability between connector and cable (2 layers shielded cable)≥20Kg20General use for connectorThe same model connector can be used in 2 layers,3 layers,or 4 layers RG6 shielded cable21Work temp.-40ºC - +60ºCNote1: SCTE standard: ANSI/SCTE 60 2004 the test way for antifogging. Test temperature: Max. 60±1ºC, Min.1.7±1ºC. Put the test piece into the test conditions for 120h ,and circu lated from the Max temp. to Min. temp. for 10 times.Every circulation must be kept upon thd high-point or below low-point for 300±20 minutes.