F5~F9 Medium Efficiency Bag Filter

F5~F9 medium efficiency bag filterDescription:
The bag type filter can be used in the central air conditioning ventilation system for industrial and commercial facilities, hospitals,schools,buildings and other kind of factory's HVAC devices.
It can be used and installed at the location which is just in front of HEPA filter so as to try to lengthen the useful life time both of HEPA filter and the equipment as well.
In addition, bag type filter can be used in clean room or the other areas which need more critical cleanliness level.
And it virtually works as an intermediate filter.Features:
Efficiency:F5(40-50%),F6(55-65%),F7(80-85%),F8(90-95%).
Stardand:EN779,F5 / F6 / F7 / F8.Operating conditions:
Temperature: 70°C maximum in continuous service.
Humidity: 90%RH(NO Dew).Application:
Used as first stage filters of high efficiency filters and as secondary stage filters of air condition system; typical applications include electronics, precise instrument, machinery, metallurgy, chemical, textile, pharmaceuticals, foods and many other locations where ultra-clean air is required.Premeters:
Type:Multi pletaed pre air filter.
frame:Galvanized sheet and aluminum alloy are available.
Media:Synthetic fibres.
En779:2002 efficiency:F5(40-50%),F6(55-65%),F7(80-85%),F8(90-95%).
Eurovent 4/5 efficiency:EU5,EU6,EU7,EU8.
Recommended final pressure drop:450 Pa(suggested economical change point 250 Pa).Pocketbag filter mainly be used on central air-conditioning and centralized ventilation system. It can be used as primary, medium and senior filter to protect inferior filter of system and itself. Bag air filter always adopt flat, diamond, honeycomb and V type bag. It adopts special process of ultrasonic heat sealing process which replaced the original process and avoid dust leakage on pinhole office as wellas enhance filter efficiency. The amount of small V type bag is determined by equipment's condition of using factory.Medium efficiency Specification:
Class
F5-F9Filter MaterialPleated non-woven synthetic media with wire netting on down stream sideframe MaterialCardboard, steel board, aluminum extrusionFiltration GradeMedium EfficiencyFeature1.Big windward side, large dust holding capacity, high wind speed.
2.Adopt special non-woven or glass fiber to filter.
3.The filter particle size above 0.5um.
4.Filter efficiency 40%-95%(Colorimetry)
5.Filter grade: F5-F9
6.To extend the replacement cycle, reduce costsApplicationIt's ideal configuration products to widely use in ventilation system.CertificationISO9001-2008Production Flow:
SHIPPIN AND DELIVERY:Packing:All the goods will be packed in carton box, plywood sheild, wooden box or wodden cases, we can pack the good in customers' requirements.Delivery time:within 4-15 days. We can delivery the good within 7workdays in general.
about us:
Our serivice:
we are HVAC air filter and clean room filter equipment manufacture since 2002,right now we are working with many distributors, such asPremium FiltersandInversions Abaco Ltda.Our products follow up the standard ofISO9001, CE,andSGS,quality equal withAAF, Camfilandother US brand,price is very much lower than them.If you want to know more details about our products, pls visit our web:Http:www.zhuowei-filter.com.FAQ:
Frequently Asked Questions

1. When can Iget the quotation?

We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry priority.

2. How can Iget asample to check your quality?

After price /confirm/iation, you can require for samples to check our quality.

If you need the samples, we will charge for the sample cost .But the sample cost can be refundable after order confirmation when your quantity of the order is more about the MOQ.

3. Can you do the design for us?

Yes. We have aprofessional team having rich experience in air compressor parts design and manufacturing. Just tell us your ideas and we will help to carry out your ideas into perfect product. It does not matter if you have the part No. or not. Send us drawing pictures or specifications, we'll customize it for you.

4. How long can Iexpect to get the sample?

After you pay the sample charge and send us confirmed files, the samples will be ready for delivery in 3-7 working days.

5. What is your terms of delivery?

We accept EXW, FOB, CIF, etc. You can choose the one which is the most convenient or cost effective for you.