FT44 Flanged Carbon Steel Mechanical Lever Ball Float Steam Trap

FT14 ball float steam trap (Flanged)
Brief Introduction.FT14 Ball Float Steam Trap, similar to Spirax Sarco Design, mainly used for steam system to drain condensate water,Structural characteristic :
1.The valve adopts two kinds of sealing,e,g,balance double valve seat and single valve seat with reliable closedown and long life.
2.There's always condensate water available in front of the valve with reliable water sealing and non-leakage of steam.
3.No noise before operation in favor of environmental protection.
4.At the beginning of ventilation,all the valves start and lowtemperature condensate water and air are rapidly expelled to greatly shorten the start time for equipment.
5.Internal component is made of stainless steel, corrosion and cavitation erosion proof.Field of Application.ProductName: FT14 ball float steam trap.
PressureRating: 1.6- 4.0 Mpa.
Nominal Diameter: DN15-50mm.
Body Material:Steel WCB,Stainless Steel.
Standard flanges: DIN, ANSI, JIS.
Standard Screwed:NPT,BSP.
Main Technical Parameters and Indexes of Performance.
Nominal pressurePN16Maximun design pressure(PMA)16bar g @ 120Maximun design temperature(TMA)250 @ 13bar gMinimun design temperature(TMI)-10Maximun upstream pressure for saturated steam service(PMO)14bar gMaximun operating temperature(TMO)250 @ 13bar gMinimun operating temperature(TMIO)0Maximun differential pressure( PMX )FT14-4.54.5barFT14 -1010barFT14 -1414barMaximum cold hydraulic test pressure24bar g
Material of Main Component.
Name of componentMaterial of componentValve body, valve coverWCBFloating ballstainless steel
Main ExternalDimensions.
DNAB151211072012110725150107