Factory Directly USB Finger Touch Portable Interactive Whiteboard Smart Active Board for Children In

Portable Finger Touch Interactive WhiteboardIntroduction

After years of innovative research and development, FT6 has become the main product of the new series of finger touch from OWAY Group Limited. It is not only more stable but also easier to install and use. Currently, it uses the world's most advanced laser imaging technology. The level of automation and stability are far ahead of other products.

Laser Image Calibration Technology
Oway Finger touch portable interactive whiteboards includes with two parts: emitter and signal receiver. Emitter is fixed on flat surface. It emits infrared laser curtain on the surface which is about 1mm thick invisible light and parallel with the projection screen surface, 1-2mm above the screen surface. When the fingers or any non-transparent objects touch this virtual surface, the light will be reflected and detected by the signal receiver. Computer will figure out the position of the mouse by accurate calculating the reflected light position.

Specification

Finger Touch Portable Interactive Whiteboard - FT6

Calibration

Automatic/ Manual (4/15 points)

Multi-touch

Ten points touch

Latency

<20ms

Filter

Software auto-control, enhance stability.

Minimum Active Size

40 inch

Max Active Size

150inch( no sunshine room);100inch( sunshine room)

Technology

Laser Image Calibration Technology

Positional Accuracy

±1 Pixel (Resolution: 4096*4096)

Aspect Ratio

4:3;16:9;16:10

Projector ratio

Long throw:3.0, installation distance: 2.15~3.2M.

Laser Beam

Short throw/ Long throw: 3units; Ultra short throw: 3units.

Laser safety

CLASS I (safety laser)

Wave of the laser

808nm

Power

5w

Power of Laser Beam

150mW/unit *3

Power requirements

5V/1.5A

Signal refresh rate

Real 60fps.

Connect

The sensor and computer are connected by USB Cable;

Emitter and Sensor are wireless; Emitter just need power.

Weight

0.5kg

OS Requirement

Windows XP, Vista, Windows 7, Windows 8, Windows10

Software

OwaySIWB

Certification

CE, FCC

Warranty

2-year

Package

1. Sensor 2.Emitter 3.Remote 4.USB cable (10m) 5.Pionter 6.Power Adaptor 7. Manual

Installation

FT6 is small and easy to install. It doesn't require professional technology to install.

Just install the laser emitter in the middle area above the whiteboard (or flat surface) and put the signal receiver on the projector.

Step by step guided video:

https:https://www.youtube.com/watch?v=8q8BpJj-1zs

Applications:

Presentations and business review

Video conference and collaboration

Education and training

Exhibitions and conferences

Process control and plant monitoring

Military and government briefings

Customer retail sites

Gaming and entertainment

Hospitals
Advantages:

1.High cost performance:Compared with LCD electronic whiteboards, FT6 is more cost-effective to pay for the product, installation and maintenance. And the user can enlarge or reduce the projection screen according to the demand. The LCD Whiteboard does not have this feature.

2.Stable performance, not easy to damage:FT6 interactive whiteboard external circuit only power supply wire and USB interface circuit, eliminating the data exchange circuit of the LCD panel, and reducing the information processing lines used for the display screen. It uses the PCB board to concentrate the circuit on the circuit board, Reduces failure while reducing power consumption.

3.Good compatibility:FT6 whiteboard is compatible with various software.

4.High stability:Through a variety of anti-abnormal spot interference algorithms and filter push-pull devices, the system is not easily affected by the external environment like light and temperature, even if there are small bugs or dust stuck on the board products can also operate normally.

5.Supports 100-point finger touch(100 people write at the same time and support Windows drawing software 100 points).

6.The projection area works as a touch panel for windows touch.

7.Max projection Screen:Support 40 - 150inch(Non-sunlight room)

Package & Accessories:

FT6 measurements : 35x22x13cm, gross weight 1.8KG

Item

Quantity

Square signal receiver

1

Laser Emitter

1

Electronic pen

1

Power cable

1

USBCable:7 m square line

1

CD

1

Colloidal particles

Allen wrench

Hexagon screw

Adjusting screw

1

1

1

4

Product demo on You Tube:

https:https://www.youtube.com/watch?v=DnGizSDH0Hg

We send items to all over the world by air (DHL/ UPS/ FedEx/ EMS), if you have any special service, please contact us freely at any time. We will reply you back in 24 hours.

1: about Shipping

1) Package will be shipped within 7 working days after payment is /confirm/ied.

2) Please double check your shipping address, including City Name, Postal Code, Phone Number. If there is any change, please let us know before making the payment.

3) We will not be responsible for any delay during delivery due to Custom Clearance of your country and weather condition, etc…

2: about Custom

1) If you have any special demand about your custom invoice value or your country custom requirement, please let us know before shipment.

2) If there are any import duties, taxes & charges of your country are not included in the item price or shipping charges. These charges are the buyer's responsibility.

3: After Service

1) If the items have any production problem, all items must be returned in their original condition, buyer must pay return shipping fee for items, while the seller will pay resend shipping fee.

2) We do not allow any return without first requesting an order number & contacting us.

4: Feedback & Rating

We will work with you friendly till you are satisfied with our total service. We sincerely hope that you can leave us a 100% Positive Feedback with full 5 Stars.

Special Attention:

1. Please kindly tell us what is the BEST Value to declare for the package.So that you can avoid to pay high tax or pay less, usually we declare as less than $50.

2. If you are from Brazil / Peru ,Please leave your CPF number or tax number on the order so that it's easier for you to get your package!

Attention For Russian Clients:

1. Please fill in your full name including your first name, middle name and last name when making the payment.

2. Please fill in your correct address including your Apartment No., Street, City, Region and country.