Factory Price Mask Making Machine Medical Face Mask Production Line

Product Description

Factory Price Mask Making Machine Medical Face Mask Production Line
Project Name: HLZHW-100 full automatic mask making machineProduct: flat ear band maskProduction: 100pcs / minCustomer environmental conditions: temperature 10-40 ℃, humidity no condensationCustomer voltage requirements: single-phase 220V, 50 / 60HzNotes:◆ if there are special requirements for the voltage and frequency of the project scheme equipment, it is necessary to quote again according to the voltage and frequency requirements.◆ the project plan is the standard equipment configuration provided according to the customer's project process, if there is any individual adjustment, or the customer needs to communicate and explain.The project plan is the standard equipment configuration provided according to the customer's project process, if there is any individual adjustment, or the customer needs to communicate and explain.
Mask knowledge Whether the mask is medical or not has nothing to do with the machine. As long as the mask is sterilized, the mask produced by our machine can be used as surgical maskCommon medical masks: mainly composed of three layers of non-woven fabric. The inner layer is ordinary non-woven fabric, and the outer layer is non-woven fabric with waterproof treatment, which is mainly used to isolate the liquid ejected by patients. The filter layer in the middle is polypropylene melt blown non-woven fabric with electret treatment. After the final production, it shall be sterilized by ethylene oxide and kept for 7 days for volatilization toxicity, and then transported by sealed packaging.The full-automatic wiring combination machine is to connect one mask body manufacturing machine with two mask ear belt welding machines. When the mask body is made, the conveyor belt is sent to the mask ear belt welding machine to weld the ear belt part to complete a complete ear belt mask. only one operator is required to operate the whole production line.

Technical Parameters of Factory Price Mask Making Machine Medical Face Mask Production Line

Model

HLZHW-100

Size

6250mm (L) x 4500mm (W) x 1650mm (H)

Driving mode

Servo motor and Stepping motor

Control

Touch screen and button

Electric control mode

PLC program control

Energy consumption

single-phase 220V, 50 / 60Hz

Air pressure

0.5-0.6mpa

Applicable process:

Double, three and four layer medical and ordinary masks

Product specification

Standard Type: 175 x 95mm; special type: 180 x 95mm, 145 x 90mm, 125 x 90mm

Production capacity

about 80-100 pieces / min

Qualified rate

More than 99%

Weight

800 kg