Fiberglass SMC GRP Panel Water Storage Tank

Product Description1. INTRODUCTIONSMC water tank is also called SMC storage tank, FRP/GRP water tank, SMC panel tanks. It is anew type of tank. It is made of high qualified SMC panels. Sheet molding compound (SMC) is akind of fiberglass reinforced plastic, which is amixture of unsaturated polyester resin with impregnating augmentation material, filling material and glass fiber. SMC water tank is nontoxic, durable, lightweight, corrosion resistant and good-looking. Meanwhile, it's easy to maintain and long-life. It is widely used in water storage in residential buildings, schools, hotel. SMC water tanks are used both for domestic water as well as medicine and health where needs good water supply quality.2. SPECIFICATIONPanel size: 1000mmx1000mm, 1000mmx500mm, 500mmx500mm
Panel thickness: 1mm -5mm
Tank volume: 1000 liters to 1000000 liters.
Any size can be made according to client's orders.
Items Perfomance Index Tensile Strength, Mpa≥70Flexural Strength, Mpa≥100Flexural Modulus, Gpa≥5900Barcol Hardness≥60Water Absorption≤1.0%Glass Fibre Content≥25%
3. FEATURES OF GRP TANK1). Super Hygienic
In compliance with WRAS (Water Regulation Advisory Scheme) making with
the quality of material which is hygienic passes ataste, asmell and apoisonous etc.
5 kind test being awater tank, was verified.2). Free capacity can be designed
Various sized panels can make the below tanks that utilize the most horizontal and perpendicular space and also can be erected from small capacity tank to huge tank.Tank capcity can be from 0.25M3 up to amaximum of 10,000M33). Safety of Bottom Panel for Water Pressure
The convex panel can be the water pressure created by filling the tank seals the joint preventing leakage.
In other type tanks, water pressure can loosen the joint breaking the seal and allowing the stored water leak out.4). Prevents Leakage
The joint are sealed with aspecial sealing tape.
It maintains soft itself and adhesives even at low temperature.5). Complete Drainage
The convex bottoms with aconcave drain panel system make sure complete and fast drainage.4. APPLICTION

1) Potable Water Storage (drinking water)

2) Rainwater Harvesting &Storage

3) Emergency Water Storage

4) Pump Chambers

5) Effluent/Acid and alkali solution treatment &Storage

6)hospital,buildings,building site, school and other place

5. INSTALLATION

Step 1. Install steel footings on leveled concrete foundations.
Step 2. Align GRP panels to be pre-assembled.
Step 3. Place rubber sealant from ready-to-use roll between panels.
Step 4. Connect panels with bolts and nuts.
Step 5. Position bottom panel sections, and finish up base of tank.
Step 6. Position three sides of the tank.
Step 7. Position and fix roof panels and if required, roof support pipes and plates.
Step 8. Install reinforcement if required.
Step 9. Close up the tank with the fourth side.
Step 10. Finish the internal or external reinforcement.
Step 11. Fill and test.

Installation noteTank foundation can be concrete strip beam, or Ibeam. At diagonal corners of the tank top are equipped with air filtration devices. Inside the water tank are ribs. Each connection flanges are standard 1.0MPa flanges .Cautions1. Please do not store water higher than 70°C or other liquid (chemicals, oil and so on).
2. Water tank must keep away from fire.
3. Prevent pollutants and plunges from outside.
4. Use soft apparatus to clean. As to the new water tank, clean twice before use.6. PACKING & DELIVERY7. FAQ1. Q: Are you trading company or manufacturer ?
A: yes, we are factory. welcome you come to visit our factory.2. Q: Can you customize by customers requirements?
A: yes, we can produce the machine with customized size3. Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.4. Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.5. Q: What is your terms of payment ?
A: 100% T/T deposite, Small amount less thank 5000USD.
30% T/T in advance ,balance before shippment. L/C at sight also acceptable.6. Q: Can you provide training about water tank assembly?
A: yes ,we can provide training in our factory, we can also send engineers to your factory to offer training.