Fireproof Granite Mosaic Special Basalt Fiber Mesh

Product deacription
Basalt fiber mesh is basalt fiber substrate, the polymer anti-emulsion soak coating. Thus has good resistance to acid and alkali, UV, durability, with its chemical stability, high strength, light weight, good dimensional stability, lightweight and easy construction. Basalt fiber cloth has high breaking strength, high temperature resistance and permanent flame retardancy. It can be used under the high temperature environment of 760 ºC for a long time, and can not be replaced by other materials such as glass fiber. Can be widely used in the building walls, fire prevention, thermal insulation, cracking, etc., its performance is better than glass fiber.
1Basalt mesh
5mm x 5mm. Resin Coated. Width 100 cm (39.4 inches) Roll length 40 meters. Roll Total Area 40 sq. meters2Basalt mesh
5mm x 5mm. No resin coating. Width 100 cm (39.4 inches) Roll length 50 meters. Roll Total Area 50 sq. meters3Basalt mesh
10mm x 10mm. Resin Coated. Width 110 cm (43.3 inches) Roll length 50 meters. Roll Total Area 55 sq. meters4Basalt mesh
10mm x 10mm. Special soft resin Coated. Width 100 cm (39.4 inches) Roll length 50 meters. Roll Total Area 50 sq. meters5Basalt mesh
25mm x 25mm. Resin Coated. Width 100 cm (39.4 inches) Roll length 50 meters. Roll Total Area 50 sq. meters6Basalt mesh
50mm x 50mm. Resin Coated. Width 100 cm (39.4 inches) Roll length 50 meters. Roll Total Area 50 sq. meters
Features 1.Higher mechanical strength and modulus
2.The melting point is 1450°C.
3.Typical paving temperatures
4.Lower application temperature than that for synthetic material
5.Lower elongation before break than that of synthetic materials.
6.Environment friendly
7.No special equipment is required to install the reinforcement.
Exhibit extraordinary benefits and features which makes it perfectly suitable as an ideal alternative for concrete reinforcement for projects such as roads, runways, bridges…
Designed for reinforcing roads and highway overlays to prolong pavement lifespanReduce effect of reflective cracking caused by traffic loading, age hardening and temperature cycling Ability to reduce thickness of asphalt concrete pavements
Ideally suited for concrete reinforcement due to its tensile strength and natural resistance to deterioration from alkalis Can be used under super low temperatures which helps to prevent surface cracking Mesh sizes can range from 12x12mm to 100 x 100mm to suit applications
Product performance:tensile strength: 1575Mpa
Elastic Modulus: 26.2Gpa
Elongation at break: 2.2%
Weight: 120-400g/m2
Mesh size: 5*5mm 10*10mm
Thickness: 0.5-1mm width: 1mApplication
Basalt Fibre Mesh is ideally suited for reinforcing roads, overlays to prolong life spans and reduce maintenance due to reduced reflective cracking caused by traffic loading and temperature cycling. Basalt fibre mesh, when supplied correctly makes it possible to reduce thickness of asphalt concrete up to 20%.
Because of their higher performance and potential lower costs, they have the potential to cost effectively replace fibreglass, steel fibres, polypropylene, polyethylene, polyester, aramids and carbon fibre products in many applications Typical applications include road and asphalt construction, concrete reinforcement, marine, civil engineering, automotive airport runways, tunnelling, mining and many others.It is used to strengthen the load capacity,strengthen the joints of the masonry,beamss,ceilings,buckles. When reinforcing structures that are exposed to chemical action, it is better to use this material-it is resistant to aggressive environment.1, wall reinforcement materials (such as basalt wall mesh, GRC wall panels, EPS inside and outside the wall Paul Plaster, plasterboard, etc.)
2, enhanced cement products (such as Roman column, flue, etc.)
3, granite, mosaic special mesh
4, marble back paste network waterproofing membrane cloth, asphalt roofing waterproof
5, enhance the plastic, rubber products skeleton material
6, fire board
7, grinding wheel fabric
8, road pavement with geogrid
9, construction with embedded tape and many other aspects.
Our service:
1.Reply your inquiry in 24 working hours.
2.Experienced staffs answer all your questions in fluent English
3.Special discount and protection of sales are provided to our distributor.
4.Sample:we can send out sample for test in one week if the order quantity is big enough. But the shipment charges isusually paid byyour side,the charges will be rebounded when we haveformal order.
5.Professional factory: We are manufacturer,specializingfor more than 10 years,competitive withgood quantity.
6.As an honest seller, we always use superior raw material, advanced machines,skilled technicians to ensure ourproductsto be finishedin high quality and stable feature.
Contact:
Qingdao Haisan New Energy Co.,Ltd.
Add: No.155Jia-13,WenchangRoad,LicangDistrict,Qingdao,Shandong,China.
Tel: 86-532-66883018
Mobile :86-18554889732
Website: www.qdhaisan.com
Name :Evan Zhou
FAQ:Q1. May Ihave the sample for testing?A:Yes, we are glad to provide free samples within 1week.Q2.Can we use our own logo or design for sticker?A:Yes,you can ,you can contact with the salesman, please send an email to her /him and tell.Q3.What certification do you have?A:CE,ISO9001/ISO14001/OHSAS18001 etc.