Free Ball Float Steam Trap (GACS41H)

CS41 Free Ball float Steam Trap
Brief Introduction.Advantages.1.Continues discharging saturation condensed water without accumulation, and so get the maximum thermal efficiency.
2.When steam pressure changes, the ball float can adjust the opening of valve seat without influence, and so it is stable.
3.With automatic and manual releaser, and so its exhaust performance is good without airlock and working is smooth without noise.Working Principle.a.When the device starts up,as the temperature of steam trap is low,sylphon temperature sensing element contracts,air vent hole (A) open,discharging the air inside continiously,realizing quick opening.
b.When condensed water flow into steam trap,air is discharged from air vent(A) automatically,float ball rises with level of condensed water,then condensed water is discharged from drain hole(B).
c.When hot condensed water and steam flow into steam trap,the liquid in sylphon expands under high temperature,air vent(A) close accordingly,float ball rise and down with the level of condensed water,discharging hot condensed water.
d.When condensed water stop flowing into the steam trap,float ball falls with level of condensed water and close the drain hole(B),as the drain hole is always under the level of condensed water,forming water sealing,no steam leaking.Application.By automation, speediness and continuing features, this valve is used for the steam heating equipment, condensation water recovery system and the place where needs removing condensation water at quick speed, and so stop steam leakage effectively and obtain optimum heating.
Main Technical Parameters and Indexes of Performance.
Mini Working Pressure0.01MpaMaxi allowable temperature for cast steel42 5Mini Working Pressure0.01MpaMaxi allowable temperature for cast steel42 5Mini degree of super cooling0Maxi allowable temperature for stainless steel525Leakage rate with loading0Working MediumSaturated vapor, condensed waterMaxi allowable rate of back pressure80%Exhaust plantStainless steel / alloy
Material of Main Component.
Valve body, capWCB / 304Valve seat2Cr13 / 304Floating ballStainless steelFilterStainless steel
Main ExternalDimensions.
Producnt modelDNConjunction methodMax.allowable temp.Material of valve bodyExternal dimension (mm)LH1H2WA series
Free Ball floating
Steam Trap15Internal thread350WCB12082898420Internal thread350WCB12082898425Internal thread350WCB120849584B series
Free Ball float
Steam Trap15Internal thread350WCB1508411411420Internal thread350WCB1508411411425Internal thread350WCB15086.5116.511432Internal thread350WCB15598.5104.511440Internal thread350WCB15598.5104.511450Internal thread350WCB21098.5104.5114C series
Free Ball float
Steam Trap15Flange350WCB19594.510713220Flange350WCB19597104.513225Flange350WCB215101.5111.5140D series
Free Ball float
Steam Trap25Flange350WCB270102.515118032Flange350WCB270109154.518040Flange350WCB28011217018450Flange350WCB290117175195F series
Free Ball float
Steam Trap50Flange350WCB41013212927065Flange350WCB410139.5136.527080Flange350WCB430148313275100Flange350WCB430158323280G series
Free Ball float
Steam Trap80Flange350WCB550147331335100Flange350WCB550147331335125Flange350WCB550169.5353.5335150Flange350WCB550169.5353.5335