Fs8000 Nitrogen Machine for Truck

Feature:
PSA(Pressure Swing Adsorption)Tire Nitrogen Machine, being used widely, does not need high cost equipments, land and high salary maintenance technicians, but it can produce Nitrogen with low cost, high purity and low dew point.
It is based on using the latest PSA technology and utilizes Carbon Molecular Sieve (CMS)
To separate nitrogen from the other gases contained in air. When the air is compressed, N2 and O2 make up of most part of the air, however, oxygen molecules are much smaller than Nitrogen and their diffuse speed is different, by using this point, the gas can be separated. After this process is finished, the CMS adsorbs the oxygen molecules, so the nitrogen produced by PSA has high purity and low dew point. Generally speaking, it is very easy to obtain the nitrogen with purity 99% and dew point -60ºC. Our company is able to design and manufacture according to user's requirements. The highest purity of nitrogen can be reached 99%.
Specifications:
Power supply :380V/50~60Hz
Power : 60W
Nitrogen Purity : 95~99.5%
Operation Temp:+5ºC~+70ºC
Compressed Air Pressure Required:<174Psi/12Bar/1.2Mpa
Air compressor discharge rate :>1.08M3/Min
No supercharger,Output Nitrogen Pressure : 87Psi/6Bar/0.6Mpa
Supercharged Nitrogen Output :≤232Psi/16Bar/1.6Mpa
Nitrogen Output:160L/min(5.6cfm)@174psi/12bar
Truck Tyre (10.00/20 R75 size):15Tyres/Hour
Dimension:1700(H)X930(L)X640(W)mm
Net weight :263 Kgs
Packing size:1890(H)X960(L)X7670W)mm
Gross weight :293 Kgs
Storage tank packing size :620x1750(mm)
Storage tank weight :97 Kgs
Dimensions: