Full Automatic Wood Veneer Composing Machine

Core veneer jointer machine is suitable for core joining together in plywood production line. It can work different length sizes of core veneer with high strength thread and hot melt adhesive connection as one whole body Then facilitate the subsequent stages of production of plywood line. The whole process can be operated by one worker, it is time-saving and efficient.
1.Working principle
The core veneers (1.0-4.0mm thickness panels) after drying may have different length and thickness, and the shapes may get irregular, this core veneer composing machine can detect width, thickness, cavities of the core veneer , trimmed, glued, composed, cut to length and stacked automatically. With this machine, the core veneer with different sizes can be composed in one whole sheet.
2.Working process
1. feeding delivery----2. plate correction----3.the former drive----4. cut and control-----5. after the drive----6.docking puzzle----7.finished plate cut off The entire operation process only by a person operation. Finished plate, small material in the board, abandoned scrap, can be stitching, not only saves the cost, but also saves the artificial.
SPECIFICATIONS FOR 4 FT PLYWOOD CORE VENEER JOINTING MACHINE
Driver system
Driver
Servo-type
Siemens servo motor
Cutter driver
motor+electromagnetic clutch
Taiwan Chain Tail clutch
Driver reducer
Star type reducer
8/1
Dimension
complete machine
L*W*H(mm)
12000*2600*2500
Jointing machine
L*W*H(mm)
3600*2600*2500
veneer stacker
L*W*H(mm)
4000*2200*2500
Control system
Control module
PLC computer module
TDATDA PLC
rotary actuator
photoelectric sensor
FESTO(germany)
Heating control
*
Automatic Control