Fully Automatic Flat Type Disposable Nonwoven Face Mask Machine For Surgical Use

Fully automatic face mask production line

Picture:

Sample picture:

Advantage:

1. The whole machine adopts aluminum alloy structure, which is more beautiful and sturdy

2. High stability

3. Two output lines, high output

4. Fully automatic outer ear spot welding machine can make mask sheet and external ear welding spot welding part at the same time, which can save labor. once the non-woven fabric material is used up in the production process, the machine can stop automatically.

Production line structure:

A host (face mask making machine) plus two ear band welding machines (outer ear bands) are connected by a one-to-two transmission line. It can realize the full-automatic production process from coil feeding, folding and pressing, and slitting, ear band feeding machine welding, and unloading.

Staffing requirements: 2 operators

Support mask production type: flat non-woven mask 3/4 layer

Power: 11KW

Technical Parameters:

Model

ZX-1950-2

Capacity

100-120pcs/ minute

Voltage

220V/60hz

Machine size

L6400*W3200*H1680mm

Mask size

17.5*9.5cm

Power

11KW

Weight

1700Kg

Main machine configuration sheet:

1. Face Mask ontology Machine Function Introduction

Fully automatic flat mask production line adopts advanced design. It only needs to place the production raw materials on the feeding rack. After the modulation is completed, the machine can automatically produce. only one person needs to operate the packaging, which fully realizes the entire automated production. Sonic welding method, beautiful style, health and environmental protection.

The output is 100-120 minutes, the length of the nose bridge strip is adjustable, and the product size error is ± 1mm. According to demand, some molds can be replaced to achieve a variety of mask sheets. This machine can produce a variety of non-woven masks, smooth cloth Masks, gauze masks, activated carbon masks, double nose line masks, etc. Supports 1-5 layers of non-woven mask sheet production.

2.Face Mask ontology Machine Technical Pareters

Model:

ZX-1950-2

SIZE:

L3345*W630*H1830mm

Voltage:

AC 220V,50-60HZ

Capacity:

100~120 pcs/minute

power:

2.7KW

Ear band spot welding part configuration sheet:

1. Equipment function introduction

Ultrasonic welding is used to fuse the elastic bands to the inside of the two ends of the mask body. It is the last processing step of the production of inner ear masks. only one operator needs to place the mask body in the mask plate. automatic completion. This machine adopts servo and step drive, with precise transmission and adjustable speed.

2.Technical parameters of external ear strap machine

Size:

1915*855*1780mm

Voltage:

AC 220V,50-60HZ

Productivity:

50-60pcs/minute

Power:

2.7KW