Fully automatic 3 ply face mask portable sheet folding machine

Automatic folding mask equipment

Instructions

The production equipment of folding mask machine includes a whole set of assembly line equipment such as mask forming, among which mask forming and mask mask production are all carried out by fully automatic ultrasonic equipment. The blanking and cutting of masks can be completed by a single machine, which greatly improves the production efficiency.

The equipment parameters

1. Automatic counting can effectively control the production efficiency and progress.

2. Frequency conversion control, which can adjust the running speed of the equipment according to the actual needs.

3. High degree of equipment automation, low requirements for operating staff, only feeding and finishing finished products.

4. Modular, user-friendly design and maintenance convenience.

Process flow:

After the whole roll of the cloth is rolled, it is compounded together by rollers. The cloth is mechanically folded and the nose bridge strip is rolled for traction. After the length is fixed, the cloth is cut

It is imported into the edge cloth, and the two sides are welded to the sealing through ultrasonic welding, and then through ultrasonic lateral sealing, and then through the cutting tool cutting and forming;Through a

Drag two dispenser to split the mask body into two ear belt spot welder, ultrasonic welding ear belt;Set a number for stacking and receiving.

Equipment composition table

Serial name indicates quantity remarks

1 plate-making machine is provided for anti-coiling, recombination, mechanical folding and slicing

2 one tow two distributor interval shunt 1 big family provided

3 outer ear belt spot welding machine outer ear belt welding 2 big family to provide

Equipment environment requirements

1. The ambient temperature is required to be between 15 ℃ and 35 ℃.

2. Humidity requirement is 40% ~ 80%, no condensation,

3. Power supply network requirements: AC220V,50Hz;

4. Power supply network fluctuation: ± 5%, power grid grounding line meets international requirements.Voltage amplitude more than 5% of the area, should be installed automatically

Stabilizing device;

5. There should be no strong electromagnetic signal interference near the installation equipment and no radio transmitting station (or relay station) around the installation site;

6. Amplitude of foundation: less than 50um;Vibration acceleration: less than 0.05g;Avoid a large number of stamping and other machine tools in the vicinity;

7. Equipment space shall be smokeless and dust-free, so as to avoid working environment with heavy dust like metal polishing and grinding;

8. Air pressure: 86 ~ 106kpa;

9. Some environments should be equipped with anti-static floor, strengthen shielding, etc.;

Large group laser manufacturing standards

1. Electrical safety of laser equipment and facilities;

2.GB/T 15706.2 -- 2007 general principles for mechanical safety concepts and design;

3. Provisions for electromagnetic radiation protection;

4. The quality standard of large group laser products is: iso9001:2000.

Main configuration sheet:

name

supplier

rake construction

Shanghai Baosteel

Equipment appearance material

Shanghai Baosteel

gear

Baosteel

gear shaft

Baosteel

circuit breaker

Schneider

contactor

Schneider

push-button

Schneider

power

Takasaki

electric relay

OMRON

fuse

Delicacy

PLC

Mitsubishi

touch screen

Weilun