GHL High Speed Mixing Granulator

The powdery raw material and adhesive in a cylinder are fully mixed at the bottom to become a humid soft material. Then it is cut by high-speed cutter and become uniform damp granules.
1. The machine adopts horizontal cylinder structure, its structure reasonable.
2. The inner surface of equipment has no dead corner. It works at sealed state and conforms to the requirements of GMP.
3. Granulating time is short, high efficiency and energy saving.
4. The character of granule is uniform and the mobility of granule is good. It provides ideal granule material to tablet pressing procedure.
5. Compared with traditional process, it can reduce 25% of binder and shorten drying time too.
6. Each batch needs 2 minutes to dry mixing and 1~4minutes to granulating. Compared with traditional process, its efficiency can raise 4~5 times.
7. Whole operation has strict safe protective measures.
8. It can mix uniformly even when the gravity difference between main material and accessories is very big, without the layered phenomenon.
ItemSpecificationNameUnitGHL10GHL50GHL150GHL200GHL250GHL300GHL400GHL600CapacityL1050150200250300400600OutputKg/batch3155080100130200280Mixing speedRpm300/600200/400180/270180/270180/270140/220106/15580/120Mining powerKw1.5/2.24/5.56.5/89/119/1113/1618.5/2222/30Cutting speedRpm1500/3000Cutting powerkw0.85/1.11.3/1.82.4/34.5/5.54.5/5.54.5/5.56.5/89/11
Changzhou Aokai Drying Equipment Co., Ltd. was established in 2004, and is specialized in the design, manufacturing and development of the drying, calcination, cooling, crushing, mixing and granulating equipment. Aokai is located in Benniu Town Xinbei District of Changzhou City, close to Beijing-Shanghai Railway, Shanghai-Nanjing Expressway and Changzhou Airport.The company has 4 modern standard workshops, about 13600 m2. There are 15 mid-level and senior engineers. It has more than 80 sets of processing devices and its annual production capacity can be more than 500 sets with over 30 categories. The company can provide dryer, solutions and service according to GMP, cGMP and FDA certification.The company has obtained the certification of "National High-Tech Enterprise", been the member of China Pharmaceutical Equipment Industry Association. Also, the company has passed ISO9001:2008 Quality Management System Certification, ISO14001:2004 Environmental Management System Certification and many other certificates as well as 20 more core technologies getting patent certificates.For a long time, the company focuses on the scientific and technological innovation, always persists in the technology upgrading as the core, and takes the optimizing of the product structure as the development direction. The company has a professional technical team to cooperate with some scientific and research institutes to develop new products, absorbs and digests advanced technologies from China and overseas, continues to explore various patent technologies to widely used in the fields of chemical, pharmaceutical, foodstuff, pigments, new materials and military industries. Aokai has already stepped into the international market and established a good reputation.With the development, the company has accumulated strong capital and technical strength, created an intelligent and harmonious team. The company has a pilot plant with many types of testing machine for customers to do test and select suitable models.Aokai sincerely welcome the majority of insight to make great achievement together. Also warmly welcome to Aokai.
1. Q: Please describe your warranty period.
A:15 monthsafter the equipment is arrived at the destination portor 12 monthsafter the installation and commissioning of the equipment, whichever comes first.2. Q: Do you provide on-site installation and commissioning?
A: Yes, we do. If on request, we'll provide the guidance of on-site installation and commissioning. Usually one mechanical engineer and one electrical engineer to assist.3. Q: How about the cost of on-site installation and commissioning guidance?
A: The cost consists of round-trip air tickets, room and board expenses, service cost (labor cost), and site transportation (or directly provided by client), which shall be paid additionally.4. Q: Are you a factory or a trading company?
A: We are a professional manufacturer. We have a pilot plant for customers to do sample testing.