GPS Tracker+RFID Car Alarm+Bluetooth Diagnostics+Wireless Immobilzier Anti Jammer-Ef

TK228 OBD-II GPS Tracker is a multifunctional product. It is an integration
of OBD-II GPS tracker, RFID car alarm, Remote/Bluetooth Diagnostics &
wireless immobilizer.
It has plug & play design, which is compatible with all the cars with OBD-II
connector, and it supports all the CAN-BUS protocols as followings:No.Protocol NameProtocol standard1ISO9141-2ISO91412KWP2000_5BPSISO142303KWP2000_FAST4CANBUS_11B_500KISO157655CANBUS_29B_500K6CANBUS_11B_250K7CANBUS_29B_250K8(optional)SAE J1939
The device will read vehicle's ECU's data (speed, rpm, odometer, speed,
driver behavior data...etc) via CAN-BUS and send out by GPRS network
remotely or by blue-tooth connection on spot.
It adapts 2.4Ghz RFID technology, which can make it work as a simple
keyless alarm system with easy installation. In arm status, the following
operations will trigger alarm: engine on, vibration, cut-off power & take-out of the
device. The system will send out alarm message with location by SMS/GPRS to
your mobile phone or tracking center immediately.Features & Functions
1. Plug & play design with OBD-II connector, compatible with all the vehicles
with OBD-II connector, supports most of vehicles with the CAN-BUS;
2. It is the integration of GPS tracker + RFID car alarm + Bluetooth
diagnostics+ Wireless immobilizer;
3. Arm/disarm by SMS/phone call, or by 2.4G RFID tag automatically;
4. Check the real physical address (such as city name, street name.) directly;
5. Track by SMS/website to get the latitude, longitude, speed, direction &
odometer etc.;
6. Movement alarm, Over-speed alarm, Geo-fence alarm;
7. Engine on alarm, power failure alarm, vibration alarm;
8. Anti-tamper alarm. once the device is disconnected, it will trigger the alarm;
9. Built-in shock sensor for power saving & triggering vibration alarm;
10. Monitor the voice;
11. 2.4G long-distance contactless RFID tag for driver ID identification;
12. Keyless RFID car alarm function, arm/disarm automatically;
13. Accurate odometer & speed reading directly via CAN-BUS;
14. Data logger 4Mb for offline GPS waypoint;
15. Wireless immobilizer to stop the car in safe mode;
16. High reliable anti-tamper design. If the unit is unplug illegally, it will lock the
engine automatically.
17. Built-in rechargeable backup battery; when the car battery is cut off or
damaged, the built-in backup battery can work for emergency check, and
the system will send out power failure alert immediately.
18. Two kinds of location information: GPS coordinates & GSM base station
code.
19. Remote diagnostics function. Transmission of the CAN data via blue-tooth
or GPRS network: (1) Vehicle's real-time data: battery's voltage, RPM,
speed, TAP throttle opening, engine load, coolant temperature, fuel
consumption, odometer, error code & times, acceleration times &
deceleration times; (2) Driver behavior data: ignition time, total driving time,
total idling time, average engine hot-start time, average speed, history high
speed, history RPM, total acceleration times & total deceleration times
20. Read the vehicle's error code & clear the error code via GPRS or blue-tooth;
SpecificationsItemsSpecificationsWorking voltage:+10.0 ~+60VDC/2.0ABackup battery:Rechargeable 3.7V 200mAh Li-ion batteryDimension (main unit):54.0*51.5*28.5(mm)Weight (main unit):73gGSM frequency:2G: 850MHz/900MHz/1800MHz/1900MHz
3G: 800/850/900/1900/2100MHzGPS chipset:U-blox7 chipsetGPS sensibility-162dBmGPS receiving channel56 channelsWorking frequencies1575.42Mhz C/A(GPS)Positioning accuracy≤10m (wide-open area)Speed accuracy≤0.1M/S (wide-open area)Positioning modeAuto 2D/3DHot start1 sec., averageWarm start2 sec., averageCold start40 sec., averageWorking temperature:-20 ~ 85ºCHumidity:0 ~ 95%