Garle 5kw Electronic Ballast for UV Printing and PCB Production

Key Features:
Output voltage range:200V-500V
Receiving of fault switch signals from external equipment: when the external equipment fails, the UV viarable frequency power supply immediately sends alarms and stops.
Integrated inverter fan control to ensure appropriate exhaust and improve curing efficiency
Unique multi-stage speed setting, through the combination of the ON/OFF state of two external switches to create four levels of power values to be output
Functions of external terminal start and stop and external stand by to reduce energy consumption and prolong life
Various communication interfaces, including standard RS485 communication interface supporting Modbus RTU, and expansions for CANopen and Ethernet communication.Technical Features:
Input
Nominal voltage, frequency
3 phase(4T#Series)380V 50/60Hz
Voltage allowable range
3 phase(4T#series)300V~460V
Digital input DI
Standard configuration 3digital input DI1/DI2/DI3
Analog input AI
Standard:0~10Vvoltage input(AI)or0~20mAcurrent input(AI)
Output
Output Voltage
4T#Series:200-500V
Output frequency
1.0KHz
Digital output DO
Standard configuration 3digital output DO1/DO2/DO3
Analog output AO
2route0.0~10.0Vvoltage output signal
Relay contact output
Standard configuration one groupAC 250V/2Anormally open/closed contact
Control method
Power vector control
Control feature
Power setting resolution
0.1KW
Current Restriction
110%lamp rated current
Voltage Restriction
110%lamp nominal voltage
Power limitation
Max output lamp rated power
Overload Capacity
100%--Long term
Under voltage restrain in operation
Specially aim at low network voltage and frequent fluctuate network voltage users, even lower than allowable voltage range, system still maintain its longest conceivable running time by unique algorithm and residual distribution.
RS485Communication
Standard configurationRS485communication interface, it can control UV power supply running and stop, functional parameter setting and modifying, read equipment status, etc.
Typical function
Standby function
Set standby power consumption to save energy when facility is interval.
Working time record
Record lamp working time when running
Operation function
External dry contact signal, RS485communication signal control facility start/stop
Display
Operation panel display
Monitor status
Real-time monitor output power, output current, output voltage, module temperature and setting power.
Alarm content
Latest 6 times malfunction record, every malfunction code, latest malfunction trip output power, setting power, output current, output voltage, DC voltage, module temperature, etc.
Protect/alarm function
3 phase current input loss phase, input under-voltage, input over-voltage, output over-current, output short circuit, facility overheat , temperature detection, output disconnection, internal storage damage, etc.
Environment
Ambient temperature
-10ºCto+45ºC(no freeze)
Ambient humidity
90%below(no frosting)
Surroundings
Indoor(NO direct sunlight, corrosion, inflammable gas, oil fog, dust, etc.)
Altitude
Lower than1000m
Structure
Protection Level
IP20
Cooling method
Forced air cooling
Product Detail
Company Overview
FAQ