For Apple iPad Pro, you can decorate it with our extraordinary 3D sublimation cover.It is a frosted cover of high quality. This cover can be sublimated with excellent printing effects, which will never let you down.Create your favorite image or text and print it on the cover. Therefore, the cover could be a perfect gift for your own, your family, friends and colleagues. It could be a hot-selling product as well.Product InfoItem Name:Glossy Polymer 3D Cover for iPad Pro (ID3D04G)Item No.:ID3D04GMaterial sense:GlossyMaterial:PolymerPacking:50 pcs/cartonHeating Tool:TIM04Printing InstructionsFor 3D Vacuum PressesPrinting parameters for reference: without preheat, 195ºC, 9 mins for 1 pc, 10 mins for 2 pcs1. Print on the sublimation paper, mirror image;2. Tear off the protection film before printing;3. For paper folding and wrapping, the paper shall be folded and wrapped tight on the angles of covers with right angles (as for iPhone covers); the paper shall be cut and folded alone the diagonal for covers without right angles;4. Turn on the machine;5. Make sure the paper wraps the cover tight when vacuuming;6. Manipulate the printing fast to reduce heat loss;7. Put it into the cold water.Printing parameters for reference: with preheat, 145ºC, 3 mins1. Print on the sublimation paper, mirror image;2. Tear off the protection film before printing;3. Fasten the picture with the cover with the thermal tape outside and inside;4. For paper folding and wrapping, the paper shall be folded and wrapped tight on the angles of covers with right angles (as for iPhone covers); the paper shall be cut and folded alone the diagonal for covers without right angles;5. Preheat the machine to 145ºC for 20mins;6. Make sure the paper wraps the cover tight when vacuuming;7. Manipulate the printing fast to reduce heat loss;8. Put it into the cold water.