Graphtec Flatbed Cutting Plotter FC4500

A New Generation of Flatbed Cutting Plotters is Here!
Flatbed Cutting Plotters are used for a wide range of industrial applications and processes. Max. 750 mm/S cutting speed for high performance and productivity from your desk-top model
Has a good selection of tools so suitable for various processes
Precise control of contour cut, half cut, perforated cut, and plotting.
Ideal for creating samples or small production runs.
Suitable for print and cut using ARMS
Equipped the ARMS (Advanced Registration Mark Sensing system). Easy and accurate cutting of pre-printed images using Cutting Master 2. Enables higher productivity of POP, stickers and prototype cartons.
Work with harder, thicker, and thinner materials
Suitable for PET (polyethylene terephthalate), Polyamide, Stiff paper, Cardboard, Microflute board or Industrial materials with precise adjustable cut pressure up to 600gf.
Applications
Enhanced functions for higher productivity
Repeated cutting function
This function enables multi pass cutting to be performed on a medium that cannot be cut with a single cutting operation.
2-Tool holders for easy selection
Two tools can be mounted at the same time for easy switching. If the cutter blade and the creasing tool are mounted at the same time, cutting and scoring operations are performed automatically for higher productivity.
Note: The second tool is held by magnetic force on the FC4500-50 so the choice of tool is limited.
The spacing between the two lines indicated by the arrows should be approximately equal to the thickness of the substrate.
However, the type of substrate being scored and the temperature and humidity of the working environment can all affect the ideal value. Please adjust the settings to suit your own conditions.
Simple creasing function
A simple function to create fold lines for clean folding on micro-flute and cardboard has been enabled.
· Up to three fold lines can be selected.
· If two or three fold lines have been selected, the spacing between the lines can also be specified.
· Repeated creasing operations can also be specified for each of the lines.
How to determine the number of crasing lines
· Single-line: Substrates up to 0.1 mm thick
· Double-line: Paperboard 0.1 to 0.5 mm thick
· Triple-line: Rigid cardboard 0.3 to 0.5 mm thick
Advanced reverse-side cutting / creasing function
Cutting and creasing can be carried out from reverse-side when using the registration marks. This prevents crease line from appearing on the printed surface.
Tangential emulation
Graphtec's proprietary tangential emulation provides precise and clean cutting even on thicker material, ensuring sharp edges and corners.
Advanced Registration Mark Sensing system
Automatic ARMS sensitivity adjustment
The sensitivity of the Mark sensor can be adjusted to match the cutting media, it enables the use of various colors of media & registration marks.
Compatible OS
Windows Vista / XP / 2000, Mac OSX 10.2 - 10.5
Compatible Software
Adobe Illustrator, CorelDRAWStrong Service Support:
10 year's exporting experience help you with professional documentaries, shipping matters, importing guidance and timely follow-up notice. Make you whole process worry-free! One year warranty! online skill training till you can operate! Professional technician provide with lifelong support to make you feel worry-free to use, buy and profit! Model nameFC4500-50FC4510-60ConfigurationDigital servo system, FlatbedMedia hold-down methodElectrostatic adhesion or Adhesive sheetAdhesive mat or Adhesive sheetEffective cutting area590 x 430 mm (23.2 x 16.9 inch)860 x 600 mm (33.8 x 23.6 inch)Mountable media500 mm (19.6 inch) (Y-axis direction)666 mm (26.2 inch) (Y-axis direction)Media typeMarking film (vinyl, fluorescent and reflective)
Stiff paper/card (for stencils etc. ) up to 0.5 mm thick *1
Polystyrene foam sheets up to 0.8 mm thick *2
Sandblast rubber sheets up to 1.0 mm thick *2
Microflute board (F/G grades)
Clear sheets for plastic boxes
High-intensity reflective film *3Maximum cutting speed750 mm/s (30 inch/s) (1 to 75 cm/s in 23 steps)Cutting pressureTool 1: Max. 5.88 N (600 gf), in 48 steps
Tool 2: Max. 2.94 N (300 gf), in 30 stepsTool 1, Tool 2: Max. 5.88 N (600 gf), in 48 stepsMinimum character sizeapprox. 5 mm square (varies with the character font and media)Mechanical resolution0.005 mm (5 μ m)Programmable resolutionGP-GL mode: 0.1/0.05/0.025/0.01 mm, HP-GL ™ *4 : 0.025 mmDistance accuracyMax 0.2% of the distance moved or 0.1 mm, whichever is lager *5PerpendicularityMax 0.3 mm / 430 mmMax 0.4 mm / 610 mmRepeatabilityMax 0.1 mm *5Standard interfacesRS-232C, USB2.0 (Full speed)Buffer memory2 MbyteCommand setsGP-GL and HP-GL ™ *4 emulation (selected by menu)Number of tools2 toolsCutter blade, pen, and tool typesCutter blade: supersteel
Pens: Water-based fiber-tip pen, oil-based ballpoint pen
Creasing/scoring toolOthersARMS (Advanced Registration Mark Sensing System), Reverse-side cutting and creasing with ARMS, Copy function, Creasing function, Repeatedly cut functionPower supply100 to 240 VAC, 50/60 Hz (Auto switching)Power consumptionMax. 120 VAOperating environmentTemperature: +10 to +35 degree C (44 to 95 degree F) ,
Humidity: 35 to 75% RH (non-condensing)Guaranteed accuracy environmentTemperature: +16 to +32 degree C (55 to 90 degree F),
Humidity: 35% to 70% RH (non-condensing)External dimensions
(W x D x H) ,
Tolerance +/- 5mm857 x 780 x 200 mm
(33.7 x 30.7 x 7.9 inch)1172 x 962 x 200 mm *6
(46.1 x 37.9 x 7.9 inch)Weightapprox. 19 kg (42 lbs. )approx. 27 kg *6 (60 lbs. )Compatible OSWindows 2000 / Windows XP / Windows Vista, Macintosh OS10.2-10.5CertificationsUL, cUL, CE making, FCC-A, EN55022-A, RoHS