H2s Removal Impregnated Activated Carbon Pellet Biogas Treatment Air Purification and Water Purifica

Impregnated activated carbon used for biogas treatment and H2S removal.Iodine(mg/g)≥950;
BET surface (m2/g) ≥1000;
Moisture(%)≤15;
Ash(%)≤20;
Hardness(%)≥95;
CTC(%)≥60;
KOH(%) 7;
Size dia-4mm.Impregnated activated carbon is made from selected carbon by impregnating with different impregnants.This kind of product incorporates activity, selectivity and stablility, and provides good catalysis and all - purpose protection.
All purpose protection not only protects against toxic gases such as cyanides and arsenides, but also against harmful gases suc as acid gases, ammonia and carbon mono xide. Desiccants can effectively absorb water vapor from gases. Wide use is found in national defence, industrial hygiene and safety, environmental protection, etc.To further improve the action of activated carbon, we can impregnate the activated carbon with selected chemicals. Impregnation of activated carbon gives the activated carbon additional properties such as chemisorption properties which reinforces the adsorption or can result in bacteriostatic properties by controlled, low silver leach in point of use (POU) or point of entry (POE) home water appliance filters.
KOH Impregnated Coal based CarbonProduct Unit DescriptionProduct Range AvailableMesh Size (US Sieve)GAC: 4x6/4x8/4x10Diameter (mm)EAC: 3.0/4.0/6.0Iodine (mg/g) Minimum800 /850 /900 /950 /1000 /1050 /1100 /1150 /1200CCL4/CTC (%) Minimum50 / 55 / 60 / 65 / 70 / 75 / 80 / 85 / 90 / 95KOH or NaOH Impregnation (g/cc) Minimum3/5/6/8/10/12H2S Break Through Capacity (g/cc) Minimum0.14Apparent Density (g/cc)0.50 - 0.66Abrasion (%) Minimum75 / 80 / 85 / 90Hardness (%) Minimum95Moisture (%) Maximum15Potassium Permanganate ImpregnatedCoal based CarbonProduct Unit DescriptionProduct Range AvailableMesh Size (US Sieve)4x6Diameter (mm)4Iodine (mg/g) Minimum1000CCL4/CTC (%) Minimum60Ash Content (%) Maximum12Moisture (%) Maximum5Bulk Density (lbs/cu.ft.)50After ImpregnationMoisture (%) Maximum15Potassium Permanganate (KMnO4) (%) Minimum4H2S Capacity (g/cc) Minimum0.10Sulfur Impregnated Coal based CarbonProduct Unit DescriptionProduct Range AvailableMesh Size (US Sieve)GAC: 8x12/12x40Diameter (mm)EAC: 1.5/3.0/4.0Iodine (mg/g) Minimum1000CCL4/CTC (%) Minimum60 / 65 / 70 / 75Sulfur Impregnation (%) Minimum10/12/2003Apparent Density (g/cc)0.50 - 0.66Hardness (%) Minimum70/80/90/95MgOImpregnated Coal based Activated CarbonProduct Unit DescriptionProduct Range AvailableActivity (ASTM 3467) (CTC)60Particle Size (US Mesh)12x40Iodine (mg/g) Min950MgO Impregnation (%)5-7Moisture (%)2Abrasion (%) min65Molasses No Min210Silver Impregnated Coconut Shell CarbonProduct Unit DescriptionProduct Range AvailableActivity (ASTM 3467) (CTC)60Particle Size (US Mesh)20x50Iodine (mg/g) Minimum1100Ash Content (%) (ASTM 2866)2-3Sulfur Impregnation (%) Minimum10/12/2003Apparent Density (ASTM 2864) (g/cc)0.49Hardness (ASTM 3802) (%) Minimum99Bulk Density (lb/ft3)28Silver Impregnation (%)1.05NaOH Impregnated Coal based CarbonProduct Unit DescriptionProduct Range AvailableMesh Size (US Sieve)GAC: 4x6/4x8/4x10Diameter (mm)EAC: 3.0/4.0/6.0Iodine (mg/g) Minimum800 /850 /900 /950 /1000 /1050 /1100 /1150 /1200CCL4/CTC (%) Minimum50 / 55 / 60 / 65 / 70 / 75 / 80 / 85 / 90 / 95KOH or NaOH Impregnation (g/cc) Minimum3/5/6/8/10/12H2S Break Through Capacity (g/cc) Minimum0.14Apparent Density (g/cc)0.50 - 0.66Abrasion (%) Minimum75 / 80 / 85 / 90Hardness (%) Minimum95Moisture (%) Maximum15KI/Potassium Iodide Impregnated Coal based CarbonProduct Unit DescriptionProduct Range AvailableMesh Size (US Sieve)GAC: 4x6/4x8/4x10/8x20Diameter (mm)EAC: 1.5/3.0/4.0Iodine (mg/g) Minimum1000CCL4/CTC (%) Minimum60 / 65 / 70 / 75KI Impregnation (%) Minimum2/3/4/5H2S Break Through Capacity (g/cc) Minimum0.14Apparent Density (g/cc)0.50 - 0.66Hardness (%) Minimum90/95Moisture (%) Maximum15Phosphoric Acid (H2PO3) Impregnated Coal based CarbonProduct Unit DescriptionProduct Range AvailableMesh Size (US Sieve)GAC: 30x60Diameter (mm)EAC: 1.5/3.0/4.0Iodine (mg/g) Minimum1000CCL4/CTC (%) Minimum60 / 65 / 70 / 75H2PO3 Impregnation (%) Minimum5/7/8/10/12Apparent Density (g/cc)0.50 - 0.66Hardness (%) Minimum70/80/90/95
Product Name:Coal-based Aetivated Carbon for Air Purification
Usage:Mainly used for the removal of pollutants in the air, as well as the separation and purification of gases.
Size
(mm)Hardness
(%)Bulk density (g/l)CCL4
(%)Ash
(%)Moisture (%)PH1.0≥95
400-600
20-90
5-15
≤59-111.52.03.04.05.06.07.08.09.0Ningxia Anteli is the leading international manufacturer and supplier of specially activated carbons, and associated adsorption technology. We provide a complete range of activated carbon products, applications, and services, to meet all requirements. Our specialties include water, gas, air, oil, and flue gas treatments, gold recovery, and carbon regeneration using thermal reactivation techniques.Our team are renowned for both their technical know-how, and their excellent customer service. At ATL carbon, we're committed to ensuring that the exact requirements of each individual are always met, and that any given application is matched to the right solution. Our products are used in many domestic and industrial applications, ranging from shoe insole deodorisers to the manufacture of complex industrial chemicals.
Coal extruded activated carbon with high quality anthracite as raw material, it has developed pore structure, large surface area, strong adsorption capacity, high mechanical strength, easy to regeneration and low cost.We exportthe type of activated carbon ATL-E4070 to many countries with goodpublic praise, such as India, Turkey, Germany, Italy, Korea, Czech and Japan.Our advantage product is extruded activated carbon, we can provide for you size 1.5mm, 2mm, 3mm, 4mm, 5mm, 7mm and 9mm EAC with CTC 20, 25, 30, 40, 50, 60, 70, 80, 90. Welcome to contact me for the detailed information.