HDMI Spliter 4 to 2 HDMI Signal to Device 4-2

LK-HDMA42
FEATURES
Four HDMI input signals switched or split to two HDMI sink devices
Support CEC
Support deep color 30bit, 36bit
Support Blue-Ray 24/50/60fs/HD-DVD/xvYCC
Digital audio format, as DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
Support signal retiming
Support input up to 15metres AWG26 HDMI standard cable length, output up to 25metres AWG26 cable length
Inputs can be switched with the IR remote control,also can be controlled by two buttons.
It can smartly jump over those input sources which are not connected.
With the smart function of memory, it can come back to the latest status when restarted or reconnected.
No loss of quality
Installs in minutes
Need DC5V/2A power supplyOperating and Connecting:
1.Connect one cable from each HDMI source devices into HDMI Matrix inputs.
2.Connect one cable from each display (monitor or projector) into the HDMI Matrix outputs.
3.Connect 5V power supply to the HDMI 4x2 Matrix.
SPECIFICATIONS:
HDMI resolution ............…....24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support video color format .......................….24bit/deep color 30bit,36bit
Support audio format..........DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
Max bandwidth..........................................….225MHz
Max baud rate......................…...................…..6.75Gbps
Input/Output TMDS signal .............................0.5~1.5Volts p-p(TTL)
Input/Output DDC signal ........................…........ 5Volts p-p (TTL)
Input cable distance..…... ............…. ….…..≤15m AWG26 HDMI standard cable
Output cable distance...................…...≤25m AWG26 HDMI standard cable
Max working current..........................................800mA
Power adapter format......….…..Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V/2A
Operating Temperature range...........…...................… (-15 to +55ºC)
Operating Humidity range................…....….5 to 90%RH (No Condensation)
Dimension (L x W x H)...............................…260x114x45 (mm)
Weight…................................…..................…1040gIR Remote Operating Instruction1.Firstly take off the plastic film that inserted in the rear of remote board
2.The A and B mean the HDMI A output and B output.
3.If the Signal output from A,
only press the number key below A line. Like after you press the 2 key under A line, the signal 2 will output from A.
4.The plastic film is strongly advised to insert the rear of the remote board when the remote is not used for long time.Notes:
Pls use the machine as the instruction listed to keep the long use lifetime of the machine.
1.The machine should be placed at the spot far from the Damp, High-Temperature, Dusty, Erosive, and oxidative environment.
2.All parts will be free from the strong shake, hit, fall.
3.Touching the power adaptor with the wet hands is prohibited.
4.Pls hold the power adaptor head and do not pull the power cord when cut off from the socket.
5.Pls turn the power off when the machine is not used for long time.
6.Pls do not open the cover and do not touch the inside parts.
7.Pls use the original factory power adaptor.Before power on, pls check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below:Serial NOTrouble DescriptionCause and Ways to deal with1Non-Power-Connected1,Check if the power adaptor head is truly and correctly inserted the power socket.
2,Check the power switch if it is in on status.2No Picture1,Pls to make sure that the TV is on and has been connected with the machine.
2,To check if the signal source is on and well connected.
3,Check the system connection quality.
4,Check if the line is all good quality.
5,Check the cable quality3Obscure Picture1,To try again to connect the cable to be free from the unsuccessful connection.
2,HDMI Cable Quality4Remote1,Pls check if the film that stops the current has been taken out.
2,To check if the remote battery is working full.
Other Items:
LK-HDSP12HDMI SplitterHDMI Splitter 1 Input 2 output
LK-HDSP14HDMI SplitterHDMI Splitter 1 Input 4 output
LK-HDSP18HDMI SplitterHDMI Splitter 1 Input 8output
LK-HDMA42HDMI True MatrixHDMI True Matrix 4x2: 4 input 2 output
LK-HDMA44HDMI True MatrixHDMI True Matrix 4x4With RS232
LK-HDSW31HDMI SwitcherHDMI Switcher 3x1 metal house, gift box , IR&Power
LK-HDSW41HDMI SwitcherHDMI Switcher 4x1 metal house, gift box , IR&Power
LK-HDSW51HDMI SwitcherHDMI Switcher 5x1 metal house, gift box , IR&Power
LK-HDDVICV11 DVI to HDMI converterDVI+SPDIF input convert to one HDMI1.2 sink device
LK-HDRGBCV11YPbPr to HDMI ConverterYUV/YPbPr/YCbCRr+SPDIF(Optical+Coax) input signal, One HDMI output
LK-HDVGACV11VGA to HDMI converterconvert VGA+ R/L to HDMI output
LK-HDMIEXDSHDMI Extender HDMI Extender By Double Cat5E/6/7( Full HD 1080P 60m)
LK-HDMIEXDDHDMI Extender HDMI Extender by Single CAT5E/6/7 Full HD 1080P 60M