about US
www.haivocablekits.com
Wenzhou haibo cable accessories co.ltd. is a company invested and controlled by Zhejiang Haivo Electrical Co.Ltd.Specializing in the developing, manufacturing and marketing of middle and high voltage power cable accessories and IEC/IEEE type Separable Connectors.Its profucts cover 35kV and below 35 kV distribution networks as well as 220kv high voltage transmission lines.
We have international advanced rubber injection molding equipments, it guaranteed the superior performance of the product. At the same time, All kinds of testing equipments is fully equipped, we have high voltage test lavs with AC voltage withstand up to 900kV, and partial discharge test lab. We grarantee 100% product qualification.
We were successively awarded ISO 9001:2015 by DAS CERTIFICATION LTD & UKAS QUALITY MANAGEMENT, and TYPE TEST CERTIFICATES by CHINA NATIonAL HIGH VOLTAGE LABS.
We promise we will offer first-class quality, reasonable price, first- class service and following the business philosphy of development and innovation to serve global power customers!
Feature of product:Technique of full cold shrink:
Without fire work and special tools, simply pull the wick gently, will retract rely on its own elasticity, so attaches to the cable closely, each specification can be applied to a variety of cable diameter, strong compatibility with cable diameter.
Reliability of insulation:
Using liquid silicone rubber to ensure good insulation and high elasticity. Always maintain constant radial pressure on cable body after installation, insulation main body of product and electrical stress control unit preform as a whole in factory, little partial discharge capacity, "breathing" with cable body simultaneously.
Stable performance:
Supporting tube using ultrasonic welding, to ensure the reliability and stability of the products, permanent tensile and lower deformation rate, improve the warranty period of products.
Reliable sealing:
The terminal body coordinate with cold shrink branch finger sleeve, cold shrink insulation pipe and cold shrink terminal seal tube; The intermediate joint kits adopt with three layer of waterproof sealing technology, to ensure excellent seal moisture performance of accessories.
Easy for installation:
Simple installation, convenient operation, easy to master. Stripping distance is short and installation space demand is little while pretreatment of cable. Grounding method by using constant force spring to fix the earth lead
without welding or tied copper wire, and one end of the ground has been compressed with terminal, more convenient installation, safe and reliable.
Widely Use:
Pollution resistance, ageing resistance, good hydrophobic, and have excellent corrosion resistance, cold resistance and resistance to ultraviolet ray, to ensure the long-term and stable performance usage. Especially suitable for high altitude, cold, damp, salt fog and heavy pollution areas.
Main performance parameters of liquid silicone rubber materialSerial No.Item
ValueTest StandardInsulating silicone rubberInsulating silicone rubber1Hardness JIS A40±540±5GB/T5312Tensile strength Mpa≥ 6.5≥ 6.5GB/T5283Elongation at break %≥ 650≥ 650GB/T5284Tearing strength N/mm≥ 30≥ 30GB/T5295Volume resistivity≥ 5.0x1014≤ 1.5x103GB/T16926Permittivity (50MHZ)2.8-3.5GB/T16937Dielectric loss tangent value≤ 0.01GB/T16938Anti-tracking≥ 1A3.5GB/T65539Dielectrical strength KV/mm≥ 26GB/T169510Tensile set≤ 10%
Reliable stress control method for cold shrink cable accessories
At present, there are two kinds of stress control modes such as stress cone and stress pipe in the power cable accessories of 35 kV and below voltage. Using the method of stress cone alleviate stress concentration of electric field, it's the most reliable and most effective method from the electrical point of view.
Stress cone by cutting the insulation shield for outspread, make its form a trumpet-shaped, improved the distribution of electric field, reduce the electric field intensity of fracture surface of outside semi-conducting layer, maintain the operating life of the cable. It is also to use stress cone control method to homogenizing the electric field in the system of 110 kV or higher voltage.
If choose the stress control tube method, the material dispersion is large of the stress control tube, disadvantages such as the product performance is not stable and the holding force is small between the accessories and cable insulation, etc. So we choose the high reliability of stress cone control mode.
Standard for the cold shrink cable assessoriesGB11033 Basic echnical requirements of rated voltage not higher than 26/35 kV power cable accessories.
IEC60502 Insulated power cable and its accessories of rated voltage 1 kV to 30 kV.
GB5589 Test procedure of cable assessories.
GB9327 Test procedure of cable conductor compression and mechanical connection joint.
GB/T14315 Compression copper, aluminum terminal and connecting pipe for wire and cable conductors.
JB7829The Indoor and outdoor heat shrinkable type terminal for power cables of rated voltage not higher than 26/35 KV.
GB/T12706.4-2002 the fourth part of insulated power cable and its accessories of rated voltage 1 kV to 30 kV: test requirements for the power cable accessories of rated voltage 6 kV to 35 KV.
JB/T 10740-2007 Insulated power cable cold shrinkable type assessories of rated voltage 6kV (Um=7.2KV) to 35kV (Um=40.5KV) .
JB/T 8144-1995 Basic technical requirements for the power cable accessories of rated voltage not higher than 26/35KV.
GB311.1-1997 Insulation coordination for high-voltage transmission and transformation equipments.
GB/T 311.2-2002 Insulation coordination.
GB50150-2008 Acceptance test standard for electrical equipment installation engineering electrical equipment.
DL/T 620-1997 Overvoltage protection and insulation coordination for AC electrical equipment.
Application range of productThe application of our manufactured cold shrinkable series products:
Rated voltage 0.6/1 kV, nominal section: 10-630 mm² single core, two cores, three cores, four cores and five cores of cross-linked polyethylene insulated and rubber insulated power cable;
Rated voltage 8.7/10KV, 8.7/15KV, nominal section: 25-630 mm²;
Rated voltage 12/20KV, 18/20KV, nominal section: 25-400 mm²;
Rated voltage 21/35KV, 26/35KV, nominal section: 50-500 mm²;
Single core and three cores of cross-linked polyethylene insulated and rubber insulated power cable.
Application environment and conditionsLevel of environmental pollution: level IV polluted area;
The properties such as insulation level, current-carrying capacity, longterm working temperature and short circuit temperature, etc. all meet the technical requirements of supporting cables.
Widely used in the industrials of electric power, petroleum, chemical engineering, mine, railway, steel, etc. especially suitable for salt fog, severe cold, high humid-hot, and the occasions unfavorable use open flame.
Main test parameters of cable accessories 10-35kVTest ItemStandard requirementsTest results8.7/15kV12/20kV26/35kVPower frequency voltage
withstand test 5 min39kV, No flashover and
puncture54kV, No flashover and
puncture117kV, No flashover and
punctureNo flashover and punctureOutdoor terminal power frequency
voltage test rain 1 min35kV, No flashover and
puncture48kV, No flashover and
puncture104kV, No flashover and
punctureNo flashover and puncturePartial discharge test at room temperaturePartial discharge
≤ 10pC at 15kVPartial discharge
≤ 10pC at 20kVPartial discharge
≤ 10pC at 45kVPartial discharge < 5pCLightning impulse voltage test (95-100ºC )95kV125kV200kVNo flashover and punctureConductor heating to 95-100 ºC , the positive and negative polarity 10 times each,
no flashover and punctureConstant pressure load cycling test (in the air)23kV30kV65kVBy the following test
evaluationConductor heating to 95-100 ºC , each cycle for 8 h, including 5 h heating,
and 3 h cooling, total 3 cyclesPartial discharge test under high temperature15kV20kV45kVPartial discharge < 5pCConductor heating to 95-100 ºC , partial discharge ≤ 10pCConstant pressure load cycling test (in the air)23kV30kV65kVBy the following test
evaluationConductor heating to 95-100 ºC , each cycle for 8 h, including 5 h heating,
and 3 h cooling, total 60 cyclesPartial discharge test under high temperature15kV20kV45kVPartial discharge < 5pCConductor heating to 95-100 ºC , partial discharge ≤ 10pCLightning impulse voltage test95kV125kV200kVNo flashover and punctureThe positive and negative polarity 10 times each, no flashover, no punctureAC withstand voltage test 15 min23kV, No flashover and
puncture30kV, No flashover and
puncture65kV, No flashover and
punctureNo flashover and punctureOutdoor terminal salt spray test 1000 h11kV, No flashover and
puncture15kV, No flashover and
puncture32.5kV,No flashover and
punctureNo flashover and punctureIndoor terminal moisture test 300 h11kV, No flashover and
puncture15kV, No flashover and
puncture32.5kVNo flashover and
punctureNo flashover and puncture
26/35kV Full Cold Shrink Cable Terminal Kit (IV)Parm.Voltage grade35kVL1480L2≥ 400L3~1500RemarkSize L3 for regular size, specific length can
according to customers' requirements
Product specificationsSerial No.Product name3 CoresTerminal sizeApplicable of
cable crosssection(mm2)Hole dia.φHole dist.φ126/35kV cold
shrinkable
indoor
terminal kitNLS-35/3x5010.520502NLS-35/3x7010.525703NLS-35/3x9510.525954NLS-35/3x12012.5301205NLS-35/3x15012.5301506NLS-35/3x18512.5351857NLS-35/3x24012.5352408NLS-35/3x30014.5403009NLS-35/3x40014.54040010NLS-35/3x50014.540500
Note:Connection fittings in IV generation products adopt with low resistance, stable contact
special dedicated terminals.
Stress cone unique structure design, ensures good performance of the product.
The surface of wire is shrinkable, one end with crimping terminal, it is more convenient to install
Haivol 18/20kv High Voltage 3-Core Cold Shrinkab