Hand Plastic Welder HDPE Plastic Welding Rod

Hand Plastic Welder Hdpe Plastic Welding Rod1.Economic and cost-efficient entry into the welding technology.
2.Material thickness capability from 3mm to 30 mm suitable for all types of thermo plastic sheet (PP, PE, HDPE, PVDF, PVC, PPN).
3.The welding joint width can be up to 10mm.
Hot air welderTemperature controllWe use photocell to controll temperature inside.Temperature switchOutside of the gun there is temperature switch.
And once the plastic body is above 135 degree,the whole circuit will be cut off.Plastic materialAt present,this plastic is one can resist the highest temperature.
It can resist 280 degree.BearingWe use high temperature bearing manufactured in Japan.Ceramic heating elementWe use Swedish heating wire for ceramic heating element inside the hot air gun.
And ceramic material is also good quality.
It can resist high temperature 1650C.
TECHNICAL data:
ZX1600ZX34001.Power cordVoltage(V) : 42 100 120 200 230 For 50/60HzVoltage(V) : 200 230 For 50/60Hz2.Main switch3.Screw on the clampPower consumption(W) :960 1400 1600Power consumption(W) :34004.Potentionmeter for temperature adjustmentWeight (kg) : 1.3 with 3m cordWeight (kg) : 1.4 with 3m cord5.Handle & NozzleTemerature : 20-700 degrees Celsius,infinitely controlled6.Air fillterAir flow (1/min) :max.2307.Rubber standAir pressure (pa) :3000 (30mbar)after about 24 h operating time8.Adapter tubeSize (mm):customized9.Heat protection tubeDETAILED PICTURES:
APPLICATION:Welding of thermoplastic materials as well as single - ply flexible plastic and modified bitumen in the form of boards,tubes profiles,lining membranes,coated materials,films,foams,tiles and sheets.The following procedures are possible : overlap welding ,welding with rod,with tape,butt welding and melt welding.
Heating - up for forming,bending and sealing of thermoplastic semi- finished materials and plastic granules.
Dry of water - damp surfaces.
Shrinking of heat shrink sleeves,films,tapes,solder sleeves,pre formd and moulded parts.
Soldering of copper pipes,solder joints and metal foils.
Defrosting of frozen water pipes.
Activating / Dissolving of solvent free adhesives and fusion adhesives.
Igniting of wood shavings,paper,coal or straw in furnaces.