Heavy Duty Industry Steel HDPE Conveyor Belt Roller

Product parameters:
Roller DiaShaft
DiaTube ThicknessRoller LengthTube structureSurface treatmentErecting structureΦ16Φ61.2,1.550-1500PVC,
Coat rubber,
Carbon steel ,
Stainless steel ,
Aluminium alloygalvanization
chromeplate
skin glue
plastic
injectiona.spring shaft
b.mandrel shaft
c.inside thread shaft
d.outside thread shaft
e.oblate tenon shaft
f.semicircular tenon
shaftΦ20Φ81.5,2.050-1500Φ25Φ8,101.5,2.050-1500Φ30Φ8,101.5,2.050-1500Φ32Φ10,121.5,2.050-1500Φ38Φ10,121.5,2.050-1500Φ50Φ121.5,2.050-1500Φ60Φ12,151.5,2.050-1500Φ76Φ15,202.5,3.080-1500Φ89Φ20,253.0,4.080-1500Φ108Φ25,303.5,4.0100-1500Coat rubber,
Carbon steel ,
Stainless steel , Φ127Φ30,354.0,4.5200-1500Φ152Φ35,404.0,5.0200-1500Φ159Φ40,455.0,6.0200-1500Φ200Φ50,605.0,6.0200-1500Φ500Φ808.0,10.0200-1500Φ800Φ10010.0,12.0200-1500Product introduction:
TUBE:
A wide selection of tube materials are available in this series. Selection is dependant upon application, however, where loads are medium to light, PVC is recommended for maximum economy.
TUBE MATERIALS:
PVC, Stainless Steel, Galvanized, Aluminum, Carbon Steel.
AXLES:
Axles are availabe in stub axle design and through axle designs. Axle design is based upon application. Axles are spring retained for ease of installation into conveyor frames.
AXLE MATERIALS:
Stainless Steel, Carbon Steel, Galvanized Steel, Aluminum, Anodized Aluminum, Carbon Steel.
APPLICATIONS:
Food Handling, Wash-Down, Sanitary Applications, High Temperature, Corrosive Applications, Abrasive Applications, Dirty Applications, High Speed, Heavy Load, Quiet Appliactions.
ADVANTAGES:
Self-lubricating plastic resin, Ideal for impact loading applications, Heavy duty and light duty applications, No lubrication required, Corrosion resistant, High temperature applications, Low temperature applications, Sanitary design, Economical compared to stainless ball bearings, Versatile designs, Light weight, Easy installation, Quiet operation, Low maintenance, Ideal for wash-down applications.Feature:
1.Solid design, suitable for various production lines.
2. The bearing housing and steel tube are assembled and welded with a concentric automatic.
3. Cutting of the steel tube and bearing is performed with the use of a digital auto device/machine/equipment..
4. The bearing end is constructed to ensure that the roller shaft and bearing can be firmly connected.
5. Fabrication of the roller is effected by an auto device and 100% tested for its concentricity.
6. Roller and supporting components/materials are manufactured to DIN/ AFNOR/ FEM/ ASTM/ CEMA standard.
7. The casing is manufactured with highly composite, anti corrosive alloy.
8. The roller is lubricated and free from maintenance.
9. Woring life expectancy is up to 30,000 hours or more, depending on usage.
10.Vacuum sealed which has withstood anti water, salt, snuff, sandstone and dust proof experiments