High Flow Rate Fuel Transfer Pump for Fuel Dispenser

SpecificationThe TDW-BT120 pump is composed of an aluminum body to which the filter housing, the pump and the electronic motor are connected.ØNon-return valve integrated in the filter.
Ø Fuel filter consisting of a filtering cartridge in synthetic resin with stainless steel wire gauze.
Ø Self-priming blade rotary volumetric pump.
Ø Centrifugal air separator composed of two concentric pipes, the internal one allows gases separated from the liquid part to be collected.
Ø By pass valve equipped with a device for limiting and regulating pump delivery pressure.
Ø Air separator drainage reflux chamber equipped with a float valve allowing drainage of the liquid part on reaching a pre-established level, and with a vent for evacuating the air separated from the liquid.Features and Benefits:
Ø Reduced number of components
Ø Easy maintenance
Ø Reduced dimensions and weight
Ø No belts or pulleys in motor-pump connection
Ø Filter flanged to the main body
Ø Wide filtering surface
Ø Compliance with OIML Standards
Technical Specifications
Working Pressure
≤0.3Mpa
Flow rate
90-120L/m
Vacuum
≥0.06Mpa
Motor Power
0.75KW
Motor Speed
960rpm
Rated Current
2.3A
Noise
≤72dB
Suction Pipe Section
1-1/2"
Dimension
360mmx320mmx300mm
Net Weight
about15KG

1- Could you develop our own design? Yes
2- Are you factory? Yes
3- Can we visit your factory?Yes
4- Could you send the sample for testing? Yes
5- Could you offer door to door service? Yes

ContactsEric WuTel+86 0577 85881558Fax+86 0577 85881559Mob+86 18657793785FacebookChina BaoTai Science And Technology Co.,Ltd